3501282 TUBE AS Caterpillar parts
120M 2, 12M 2, 140M 2, 160M 2
Rating:
Alternative (cross code) number:
CA3501282
350-1282
3501282
CA3501282
350-1282
3501282
Weight: 8 pounds 3 kg.
MOTOR GRADER,
For full view, you need register
Information:
This diagnostic code is recorded when the ECM reads a diagnostic code that is internal in the ECM. The electrically erasable programmable read only memory (EEPROM) in the electronic control module (ECM) may be faulty. The EEPROM remembers the programmable parameters when electrical power is not applied to the ECM.The possible causes of this diagnostic code are listed:
The ECM has been replaced or new software has been installed.
There is an error with the internal memory.System Response:The machine response is listed:
Some functions may not work properly.
Some calibrated values may be reset to default values.Note: Ensure that the diagnostic code is active and that the diagnostic code indicator is active.Test Step 1. CHECK FOR THE COMPATIBILITY OF THE SOFTWARE.
For the correct software part numbers, refer to the Electronics Groups in the parts manual for the machine that is being serviced. Expected Result:The software is compatible.Results:
YES - The software is compatible. Proceed to test step 2.
NO - The software is not compatible.Repair: Install the correct software. If any modules have been replaced, ensure that the correct part number was used.If this does not resolve the problem, proceed to test step 2.Test Step 2. VERIFY THAT THE DIAGNOSTIC CODE IS PRESENT.
Turn the key start switch to the OFF position.
Turn the disconnect switch to the OFF position.
Remove connectors J1 and J2 from the ECM. Check for connector damage or corrosion. Reconnect connectors J1 and J2.
Turn the key start switch and the disconnect switch to the ON position.
Clear all inactive diagnostic codes.
Operate the machine.
Ensure that the diagnostic code is active. Expected Result:The diagnostic code is not active.Results:
YES - The diagnostic code is not active.Repair: The diagnostic code is not active now. Disconnecting and reconnecting the connector corrected the code.STOP
NO - The diagnostic code is active.Repair: If the diagnostic code is still active and the cause of the diagnostic code is not found replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace".STOP
The ECM has been replaced or new software has been installed.
There is an error with the internal memory.System Response:The machine response is listed:
Some functions may not work properly.
Some calibrated values may be reset to default values.Note: Ensure that the diagnostic code is active and that the diagnostic code indicator is active.Test Step 1. CHECK FOR THE COMPATIBILITY OF THE SOFTWARE.
For the correct software part numbers, refer to the Electronics Groups in the parts manual for the machine that is being serviced. Expected Result:The software is compatible.Results:
YES - The software is compatible. Proceed to test step 2.
NO - The software is not compatible.Repair: Install the correct software. If any modules have been replaced, ensure that the correct part number was used.If this does not resolve the problem, proceed to test step 2.Test Step 2. VERIFY THAT THE DIAGNOSTIC CODE IS PRESENT.
Turn the key start switch to the OFF position.
Turn the disconnect switch to the OFF position.
Remove connectors J1 and J2 from the ECM. Check for connector damage or corrosion. Reconnect connectors J1 and J2.
Turn the key start switch and the disconnect switch to the ON position.
Clear all inactive diagnostic codes.
Operate the machine.
Ensure that the diagnostic code is active. Expected Result:The diagnostic code is not active.Results:
YES - The diagnostic code is not active.Repair: The diagnostic code is not active now. Disconnecting and reconnecting the connector corrected the code.STOP
NO - The diagnostic code is active.Repair: If the diagnostic code is still active and the cause of the diagnostic code is not found replace the ECM. See Testing and Adjusting, "Electronic Control Module (ECM) - Replace".STOP
Parts tube Caterpillar catalog:
12H, 140M, 140M 2, 160M, 160M 2, 2290, 2390, 2391, 2491, 2590, 330C, 330C FM, 330C L, 330C MH, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 340D L, 340D2 L, 511, 521...
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD, 246C, 24M, 256C, 262C, 262C2, 272C, 277C, 277C2, 279C, 279C2, 287C, 287C2, 289C, 289C2, ...
3287073
TUBE AS
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160M, 160M 2, 160M 3, 160M 3 AWD
3229454
TUBE AS
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
120M, 120M 2, 12M, 12M 2, 12M 3, 12M 3 AWD, 140M, 140M 2, 140M 3, 140M 3 AWD, 160M, 160M 2, 160M 3, 160M 3 AWD
2633528
TUBE AS
120M, 120M 2, 12M
120M, 120M 2, 12M
2952904
TUBE AS
120M, 120M 2, 12M
120M, 120M 2, 12M
3299510
TUBE AS
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3539067
TUBE AS
120M 2
120M 2
3641319
TUBE AS
120M 2
120M 2
3255872
TUBE AS
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3255871
TUBE
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3448284
TUBE-EXHAUST
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2
3599646
TUBE AS
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3508914
TUBE
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2
3504438
TUBE AS
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3526586
TUBE AS
120M 2, 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, 160M 3
120M 2, 12M 2, 12M 3, 140M 2, 140M 3, 160M 2, 160M 3
3628944
TUBE AS
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2
3628913
TUBE AS
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2
3628912
TUBE AS
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2
3450563
TUBE AS
120M 2, 12M 2, 140M 2, 160M 2
120M 2, 12M 2, 140M 2, 160M 2
4363347
TUBE
12M 2, 140M 2, 160M 2
12M 2, 140M 2, 160M 2