TUBE 3540207 - Caterpillar

Ripper
The lever previously used to engage or disengage the ripper shank pin, has been replaced by a toggle switch. This toggle switch will perform the same functions as the lever. Refer to the text below for operation of the ripper shank pin. The toggle switch must be pulled up before moving it to operate the ripper shank pin. This will prevent it from being bumped accidentally and operating the ripper shank pin.1. Shank Pin In - To engage the ripper shank pin (detent), pull up on the toggle switch and move it toward the operator. Pull the toggle switch up and move it to the center (HOLD) position to stop the ripper shank pin movement.2. Shank Pin Hold - Pull up on the toggle switch and move it to the center (HOLD) position, and the ripper shank pin movement will stop.3. Shank Pin Out - To disengage the ripper shank pin (detent), pull up on the toggle switch and move it away from the operator.Pull the toggle switch up and move it to the center (HOLD) position to stop the ripper's shank pin movement.