TUBE AS 3542202 - Caterpillar

Personal Protection/Important Information
Illustration 3 g02166423
Personal Protection/Important InformationHazard Avoidance
Crushing Hazard (foot)
Crushing Hazard (hand)
Pinch Point Additional Contact Information
For additional product support questions concerning this tool, contact the Dealer Service Tools Hotline at:USA: 800-542-8665, Option 1International: 1-309-578-7372Note: Continuing improvement and advancement of product design can mean some photographs or illustrations in this publication will show details that are different from your service tool.Introduction
Illustration 4 g03835040
The 442-1750 Lifting Plate is to be used with a suitable lifting device. (Refer to Table 1.)Operation Section
Operation
Illustration 5 g03835065
Attach Adapter Plate Assembly to a suitable lifting device using 2H-3743 hex head bolts, 1-14thd x 50.8 (2").
Table 1
Part No.     Description    
142-1664     Lifting Device    
142-6893     Lifting Device    
226-2380     Lifting Device    Do not exceed Working Load Limit (WLL) of 2722 kg (6000 lb).
Illustration 6 g03835070
(1) Lifting Plate Adapter (2) 2H-3743 Hex Head Bolts [1-14thd x 50.8(2")] (3) C-Frame Assembly
Table 2
Specifications    
Dimensions     286.2 mm x 140 mm x 18 mm (11.27 inch x 5.5 inch x 0.71 inch)    
Working Load Limit (WLL)     2722 Kg (6000 lbs)    
Weight of Tool     6.35 Kg (14 lbs)    
Do not use spacers of any kind. Lifting Adapter should sit flat onto C-frame.
Refer to appropriate Disassembly and Assembly Service Manual for the mounting and lifting hardware required and the correct location of lifting point.Refer to NEHS0960, Tool Operating Manual for additional information on the use of shackles.Inspection and Maintenance Section
Inspection
Inspect tooling prior to each use for damage, bending, nicks, burrs, dents, cracks, bent, or worn parts. If damage is found, destroy the tool and dispose of as scrap. Replace damaged tool with new product.
Do not use unless the Working Load Limit (WLL) identification markings are legible.
Do not use if lifting plate is bent, cracked, or damaged. Do not use if any holes are elongated or deformed.
Illustration 7 g02701196
Do not use if hardware is damaged or missing.
Have the tool inspected annually by an approved dealership inspector.Cleaning
Clean the tooling using a non-solvent based cleaner.Storage
Store the tooling in a clean, dry location to prevent rust or corrosion. Tooling can be damaged by moisture or high humidity.
The tool should be stored in the most stable position.Tool Disposal
At the end of the operational life of the tool, destroy the tool and dispose of as scrap.