TUBE AS 3546858 - Caterpillar

that all safety information, warnings and instructions are read and understood before any operation or any maintenance procedures are performed.The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, filters, and the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components.Use mileage, fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, in order to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance.Note: Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Air Conditioner/Cab Heater Filter (Recirculation) - Inspect/Replace
Battery - Recycle
Battery or Battery Cable - Inspect/Replace
Cab Air Filter - Clean/Replace
Circuit Breakers - Reset
Fuses - Replace
Hub Oil (Flexxaire Fan) - Add
Hydraulic System Oil Suction Screen - Remove/Clean
Radiator Core - Clean
Track Adjustment - Adjust
Windows - Clean
Every 10 Service Hours or Daily
Boom Base Pins - Lubricate
Cooling System Coolant Level - Check
Fuel Tank Water and Sediment - Drain
Hydraulic System Oil Level (Hood Tilt) - Check
Hydraulic System Oil Level - Check
Seat Belt - Inspect
Tilt Cylinder Bearings - Lubricate
Tilt Linkage Bearings - Lubricate
Track Adjustment - Inspect
Travel Alarm - Test
Undercarriage - Check
Every 50 Service Hours or Weekly
Boom and Stick Linkage - Lubricate
Initial 250 Service Hours
Swing Drive Oil - Change
Every 250 Service Hours
Battery - Clean
Hydraulic System Oil Sample - Obtain
Swing Drive Oil Sample - Obtain
Every 250 Service Hours or Monthly
Condenser (Refrigerant) - Clean
Final Drive Oil Level - Check
Swing Bearing - Lubricate
Swing Drive Oil Level - Check
Swing Gear - Lubricate
Every 500 Service Hours
Final Drive Oil Sample - Obtain
Hydraulic System Oil Filter (Case Drain) - Replace
Every 500 Service Hours or 3 Months
Battery Hold-Down - Tighten
Fuel Tank Cap and Strainer - Clean
Hydraulic System Oil Filter (Pilot) - Replace
Every 1000 Service Hours or 6 Months
Final Drive Oil - Change
Hub Oil Level (Flexxaire Fan) - Check
Hydraulic System Oil - Change
Hydraulic System Oil Filter (Return) - Replace
Swing Drive Oil - Change
Every 2000 Service Hours or 1 Year
Refrigerant Dryer - Replace
Every 3 Years After Date of Installation or Every 5 Years After Date of Manufacture
Seat Belt - Replace
Every 6000 Service Hours or 4 Years
Hub Oil (Flexxaire Fan) - Change