TUBE AS 3557555 - Caterpillar

When Required
Engine Air Intake System - Service filters Ether Starting Aid (If Equipped) - Replace cylinder Fuel System - Service when loss of power Fuses and Circuit Breakers - Replace/reset Windshield Wipers and Washer - Inspect Bucket Edge - Replace if damaged Bucket Tips - Replace if damaged Filter Inspection - Inspect used filter for debris Ride Control Accumulator (If Equipped) - Check pressureEvery 10 Service Hours or Daily
Engine Crankcase Oil - Check oil level Transmission System Oil - Check oil level Hydraulic Tank Oil - Check oil level Radiator - Check coolant level Walk-Around Inspection - Inspect machine Fuel Tank - Drain water and sediment Air Reservoir - Drain moisture and sediment Seat Belt - Inspect Brakes, Indicators and Gauges - Test Back-up Alarm - TestEvery 50 Service Hours or Weekly *
Cab Air System - Clean filters Bucket Lower Pivot Bearings - Lubricate 2 fittings Tires - Check inflation pressureEvery 100 Service Hours or 2 Weeks *
Rear Axle Trunnion - Lubricate 2 fittings Steering Cylinder Bearings - Lubricate 4 fittings Bucket Upper Pivot Bearing - Lubricate 1 fitting Lift Arm and Cylinder Linkage - Lubricate 6 fittings Bucket Cylinder and Linkage Bearings - Lubricate 4 fittings Logging Fork Clamp (If Equipped) - Lubricate 6 fittingsEvery 250 Service Hours or Monthly *
Engine Oil and Filter - Change. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Lash - Adjust on new or reconditioned engines, then at normal interval thereafter Engine Crankcase Breather - Clean Cooling System - Add coolant additive Brakes - Test Brake Oil Reservoirs (If Equipped) - Check oil level Drive Shaft Spline - Lubricate fitting Fan Bearing - Lubricate fitting Air Conditioner (If Equipped) - Test Fan and Alternator Belts - Inspect/adjust Batteries - InspectEvery 500 Service Hours or 3 Months *
Transmission Oil Filter - Change filter Hydraulic Oil System - Change filter Fuel System - Change filter/clean screen Fuel Tank Cap and Fill Screen - CleanEvery 1000 Service Hours or 6 Months *
Transmission System Oil - Change Drive Shaft Universal Joints - Lubricate 5 fittings Drive Shaft Support Bearing - Lubricate fitting Frame Pivot Bearings - Lubricate 2 fittings Rollover Protective Structure (ROPS) - InspectEvery 2000 Service Hours or 1 Year *
Hydraulic Tank - Change oil Differentials - Change oil Engine Valve Lash and Fuel Injector Timing - Adjust Engine Valve Rotators - Check Wet Disc Brakes - InspectEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change*First Perform Previous Service Hours Items