3587467 TUBE AS Caterpillar parts
336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL
Rating:
Alternative (cross code) number:
CA3587467
358-7467
3587467
CA3587467
358-7467
3587467
Weight: 24 pounds 11 kg.
EXCAVATOR,
Compatible equipment models: 3587467:
Number on catalog scheme:
4
For full view, you need register
Caterpillar parts catalog:
Information:
Test Procedure
Note: A temporary setting of the main relief valves is required before any crossover relief valve can be adjusted. Refer to Table 3 for the temporary main relief setting for the function being tested.Note: A continuous relief of the valve for more than 10 seconds is not allowed.
Table 3
Function Temporary Main Relief Setting
Left Travel Forward and Reverse 38200 500 kPa (5541 73 psi)
Right Travel Forward and Reverse
Table 4
Relief Valve Pressure Change With One Turn Of Adjustment Screw
Main relief valve 14400 kPa (2100 psi)
Crossover relief valves 13340 kPa (1925 psi) Note: Pressure values in Table 4 are approximate values. Use a pressure gauge for adjustment.
Illustration 4 g02144721
Travel brake valve (left side)
(5) Adjustment screw
(6) Locknut
(7) Crossover relief valve (forward left travel)
(8) Crossover relief valve (reverse left travel)
(9) Locknut
(10) Adjustment screw
Start the engine.
Place the hydraulic activation control lever in the UNLOCKED position.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Set the engine speed dial to position "10" and AEC switch "OFF".
Move the joystick for the stick until the stick is at the full STICK OUT position (full retraction of stick cylinder).
Check the main relief setting pressure setting at pressure tap (1) and pressure tap (2). The pressure setting should be 35000 500 kPa (5076 73 psi).
Return the joystick to the NEUTRAL position.
Illustration 5 g03803909
Main relief valve
(A) Adjustment screw
(L) Locknut
Loosen locknut (L). Set the temporary main relief pressure to 38200 500 kPa (5541 73 psi). Tighten the locknut. Note: Turn the adjustment screw clockwise in order to increase the pressure. Turn the adjustment screw counterclockwise in order to decrease the pressure.Note: Always make final pressure adjustments on pressure rise.
Verify the temporary main relief pressure setting with a second function. Move the joystick for the boom until the boom is at full BOOM RAISE position (full extension of the boom cylinder). The main relief pressure should be 38200 500 kPa (5541 73 psi).
Illustration 6 g03137183
Sprocket (forward left travel)
(D) Track Block
(4) Sprocket
Place
Note: A temporary setting of the main relief valves is required before any crossover relief valve can be adjusted. Refer to Table 3 for the temporary main relief setting for the function being tested.Note: A continuous relief of the valve for more than 10 seconds is not allowed.
Table 3
Function Temporary Main Relief Setting
Left Travel Forward and Reverse 38200 500 kPa (5541 73 psi)
Right Travel Forward and Reverse
Table 4
Relief Valve Pressure Change With One Turn Of Adjustment Screw
Main relief valve 14400 kPa (2100 psi)
Crossover relief valves 13340 kPa (1925 psi) Note: Pressure values in Table 4 are approximate values. Use a pressure gauge for adjustment.
Illustration 4 g02144721
Travel brake valve (left side)
(5) Adjustment screw
(6) Locknut
(7) Crossover relief valve (forward left travel)
(8) Crossover relief valve (reverse left travel)
(9) Locknut
(10) Adjustment screw
Start the engine.
Place the hydraulic activation control lever in the UNLOCKED position.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Set the engine speed dial to position "10" and AEC switch "OFF".
Move the joystick for the stick until the stick is at the full STICK OUT position (full retraction of stick cylinder).
Check the main relief setting pressure setting at pressure tap (1) and pressure tap (2). The pressure setting should be 35000 500 kPa (5076 73 psi).
Return the joystick to the NEUTRAL position.
Illustration 5 g03803909
Main relief valve
(A) Adjustment screw
(L) Locknut
Loosen locknut (L). Set the temporary main relief pressure to 38200 500 kPa (5541 73 psi). Tighten the locknut. Note: Turn the adjustment screw clockwise in order to increase the pressure. Turn the adjustment screw counterclockwise in order to decrease the pressure.Note: Always make final pressure adjustments on pressure rise.
Verify the temporary main relief pressure setting with a second function. Move the joystick for the boom until the boom is at full BOOM RAISE position (full extension of the boom cylinder). The main relief pressure should be 38200 500 kPa (5541 73 psi).
Illustration 6 g03137183
Sprocket (forward left travel)
(D) Track Block
(4) Sprocket
Place
Parts tube Caterpillar catalog:
10-20B, 1090, 1190, 1190T, 120K, 120K 2, 120M, 120M 2, 1290T, 12H, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 1390, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M 2, 160M 3, 160M 3 AWD, 216, 216B,...
3637919
TUBE AS
329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 568 FM LL, 966K, 972K, C9.3
329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 568 FM LL, 966K, 972K, C9.3
7Y3964
TUBE
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311,...
303, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304C CR, 304D CR, 304E, 305, 305.5D, 305.5E, 305C CR, 305D CR, 305E, 307, 307B, 307C, 307D, 307E, 308C, 308D, 308E, 308E CR, 308E SR, 308E2 CR, 311,...
3402843
TUBE AS
336E, 336E L, 336E LN, 336F L, 568 FM LL
336E, 336E L, 336E LN, 336F L, 568 FM LL
1602695
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
3484689
TUBE AS
568 FM LL
568 FM LL
2551939
TUBE AS
325D, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 568 FM LL, M330D
325D, 330D, 330D FM, 330D L, 330D LN, 330D MH, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E HVG, 336E L, 336E LN, 340D L, 340D2 L, 568 FM LL, M330D
1350127
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
1359920
TUBE AS
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325C MH, M325D L MH
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325C MH, M325D L MH
2894096
TUBE AS
325D FM LL, 330D FM, 568 FM LL
325D FM LL, 330D FM, 568 FM LL
3839360
TUBE AS
336E, 336E HVG, 336E L, 336E LN
336E, 336E HVG, 336E L, 336E LN
3259208
TUBE AS
336E, 336E HVG, 336E LN
336E, 336E HVG, 336E LN
1359920
TUBE AS
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325C MH, M325D L MH
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C FM, 330D FM, 568 FM LL, M325C MH, M325D L MH
3571987
TUBE AS
568 FM LL
568 FM LL
3571986
TUBE AS
568 FM LL
568 FM LL
3540442
TUBE AS
568 FM LL
568 FM LL
1350127
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
1350126
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
3517687
TUBE AS
568 FM LL
568 FM LL
3517686
TUBE AS
568 FM LL
568 FM LL
2122830
TUBE AS
324D, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
324D, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
2122829
TUBE AS
324D, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
324D, 330C, 330C FM, 330C L, 330D, 330D FM, 330D L, 330D LN, 336D, 336D L, 336D LN, 336D2, 336D2 L, 336E, 336E H, 336E L, 336E LH, 336E LN, 336F L, 340D L, 340D2 L, 568 FM LL
1357829
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL
1357828
TUBE AS
330B L, 330C FM, 330D FM, 568 FM LL
330B L, 330C FM, 330D FM, 568 FM LL