3598807 TUBE AS Caterpillar parts
314D LCR
Rating:
Alternative (cross code) number:
CA3598807
359-8807
3598807
CA3598807
359-8807
3598807
Weight: 4 pounds 2 kg.
EXCAVATOR,
Compatible equipment models: 3598807:
Number on catalog scheme:
20
For full view, you need register
Information:
3. Remove the bolt and washer that holds bracket (3) to the cylinder block.4. Remove bolt and washer (6), loosen clamp (1) and move fumes disposal tube (5) away from the water regulator housing.5. Remove the bolts that hold cover (4) to the water pump, and remove the cover and elbow (2) as an assembly.6. Remove the O-ring seal from the rear of the water pump. 7. Remove twelve bolts (8) and remove water pump (7).8. Remove the O-ring seal from the front of the water pump.Install Water Pump (Industrial Engine)
1. Inspect the seals for wear or damage, and replace if needed. Put clean engine oil on the seals.2. Put the O-ring seal in position on the front of the water pump. 3. Put water pump (1) in position on the timing gear plate, and install the bolts and nuts that hold it. Make sure that the water pump gear and the gear in the front cover are in alignment. 4. Put cover (3) and elbow (2) in position on the water pump as an assembly, and install the bolts that hold the cover to the water pump.5. Install the bolts that hold elbow (2) to the water regulator housing. 6. Install bracket (5) and clamp (6). Tighten hose clamp (4).7. Connect the upper and lower radiator hoses.8. Fill the engine with coolant to the correct level. See the Operation & Maintenance Manual.End By:a. install oil cooler
1. Inspect the seals for wear or damage, and replace if needed. Put clean engine oil on the seals.2. Put the O-ring seal in position on the front of the water pump. 3. Put water pump (1) in position on the timing gear plate, and install the bolts and nuts that hold it. Make sure that the water pump gear and the gear in the front cover are in alignment. 4. Put cover (3) and elbow (2) in position on the water pump as an assembly, and install the bolts that hold the cover to the water pump.5. Install the bolts that hold elbow (2) to the water regulator housing. 6. Install bracket (5) and clamp (6). Tighten hose clamp (4).7. Connect the upper and lower radiator hoses.8. Fill the engine with coolant to the correct level. See the Operation & Maintenance Manual.End By:a. install oil cooler
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
311, 311B, 311C, 311D LRR, 312B, 312C, 312C L, 312D, 312D L, 313D, 314C, 314D CR, 314D LCR, 315D L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320 L, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D F...
2887698
TUBE AS
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR
311D LRR, 312D, 312D L, 312D2, 312E, 312E L, 314D CR, 314D LCR
3937868
TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
3284828
TUBE AS
314D CR, 314D LCR
314D CR, 314D LCR
2181154
TUBE AS
314C, 314D CR, 314D LCR
314C, 314D CR, 314D LCR
2827510
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
2452338
TUBE AS
314C, 314D CR, 314D LCR, 314E CR, 314E LCR
314C, 314D CR, 314D LCR, 314E CR, 314E LCR
3029667
TUBE AS
314D LCR
314D LCR
3598813
TUBE AS
314D LCR
314D LCR
3504079
TUBE AS
311D LRR
311D LRR
3504065
TUBE AS
311D LRR
311D LRR
3504064
TUBE AS
311D LRR
311D LRR
3504063
TUBE AS
311D LRR
311D LRR
3598859
TUBE AS
311D LRR
311D LRR
3598857
TUBE AS
311D LRR
311D LRR
3598813
TUBE AS
314D LCR
314D LCR
3598812
TUBE AS
314D LCR, 314E LCR
314D LCR, 314E LCR
3598811
TUBE AS
314D LCR, 314E LCR
314D LCR, 314E LCR
3598810
TUBE AS
314D LCR, 314E LCR
314D LCR, 314E LCR
3598809
TUBE AS
314D LCR
314D LCR
3598808
TUBE AS
314D LCR
314D LCR