3739974 TUBE AS Caterpillar parts
314E CR, 314E LCR
Rating:
Alternative (cross code) number:
CA3739974
373-9974
3739974
CA3739974
373-9974
3739974
EXCAVATOR,
Number on catalog scheme:
8
For full view, you need register
Information:
Removal Procedure
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Turn the drain valve for the sea water circuit to the OFF position.
Illustration 1 g01619714
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct procedure.
Remove plug (1) and plug (5) from heat exchanger (3). Remove washer (2) and washer (4) from plugs.
Illustration 2 g01619700
Loosen hose clamps (7). Remove tube assembly (6) from heat exchanger (3) and the water temperature regulator.
Loosen hose clamp (10), hose clamp (11) and hose clamp (13). Remove tube assembly (12) from the water pump inlet and heat exchanger (3).
Loosen hose clamps (8) and remove hose (9) from the heat exchanger and the aftercooler.
Loosen hose clamps (15) and disconnect hose (16) from heat exchanger (3).
Attach a suitable lifting device to heat exchanger (3). The weight of heat exchanger (3) is approximately 17 kg (38 lb).
Remove bolts (14) from heat exchanger (3). Note: The heat exchanger should be supported until the bolts have been removed.
Remove heat exchanger (3) from the mounting bracket.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
The engine can have the ability to auto start. Ensure that the power supply is isolated before any service or repairs is performed.
Turn the drain valve for the sea water circuit to the OFF position.
Illustration 1 g01619714
Drain the coolant from the cooling system into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Cooling System Coolant (ELC) - Change" for the correct procedure.
Remove plug (1) and plug (5) from heat exchanger (3). Remove washer (2) and washer (4) from plugs.
Illustration 2 g01619700
Loosen hose clamps (7). Remove tube assembly (6) from heat exchanger (3) and the water temperature regulator.
Loosen hose clamp (10), hose clamp (11) and hose clamp (13). Remove tube assembly (12) from the water pump inlet and heat exchanger (3).
Loosen hose clamps (8) and remove hose (9) from the heat exchanger and the aftercooler.
Loosen hose clamps (15) and disconnect hose (16) from heat exchanger (3).
Attach a suitable lifting device to heat exchanger (3). The weight of heat exchanger (3) is approximately 17 kg (38 lb).
Remove bolts (14) from heat exchanger (3). Note: The heat exchanger should be supported until the bolts have been removed.
Remove heat exchanger (3) from the mounting bracket.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
3564036
TUBE AS-TURBOCHARGER
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
3029408
TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312E, 314D LCR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312E, 314D LCR, 314E LCR
3937868
TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
3061244
TUBE AS
311D LRR, 312E, 314D LCR, 314E LCR
311D LRR, 312E, 314D LCR, 314E LCR
2827192
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
2827193
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
3598727
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
2895493
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
3715598
TUBE AS
312E, 314E LCR
312E, 314E LCR
3715600
TUBE AS
312E, 314E LCR
312E, 314E LCR
2895491
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4161782
TUBE AS
314E LCR
314E LCR
2895492
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
2895491
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204519
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204518
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204517
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204516
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4201176
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3853016
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4190393
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3967733
TUBE AS
314E CR
314E CR
3839422
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3839421
TUBE AS
314E CR
314E CR