TUBE AS 3765828 - Caterpillar

Typical Example1. Use a magnet (1) to remove valve lifters (2). Put identication marks on the lifters for installation purposes.2. Check the diameter of the valve lifter. The diameter of the valve lifter (new) must be 33.287 1.013 mm (1.3105 .0005 in.). The bore in the block for new valve lifters must be 33.388 0.025 mm (1.3145 .0010 in.). The maximum permissible clearance between the lifter and the bore for the valve lifter (worn) is 0.30 mm (.012 in.).3. Put 2P2506 Thread Lubricant on the valve lifters and camshaft lobes. Install the valve lifters in original positions in the cylinder block.End By:a. install cylinder head assembly and spacer plate