TUBE AS 3834155 - Caterpillar

Illustration 1 g00607168
Replace the filter when the pressure gauge indicates a pressure of "0.5 Mpa" or more. The filter should be replaced when this pressure is attained regardless of the maintenance interval.
Park the machine on level ground.
Open the lower right rear access door in order to access the fine filtration filter.
Illustration 2 g00607171
(1) Bolt (2) Filter cover (3) Filter element (4) Filter case (A) Band
Remove bolt (1) and filter cover (2) .
Pull out filter element (3) from filter case (4) by gripping two bands (A) .
Illustration 3 g00607173
(2) Filter cover (5) Packing
Inspect packing (5) on the filter cover (2). Replace the packing if the packing is worn or damaged.
Install the new filter by reversing Step 1 through Step 5.
Tighten the bolt to a torque of 59 2.4 N m (43.52 1.77 lb ft).
Close the access door.