TUBE AS 3834323 - Caterpillar

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-7070 Plug 4
9U-7069 Cap 4
6V-9509 Face Seal Plug 1
6V-9829 Cap As 1 Note: Put identification marks on all hose assemblies and on all tube assemblies for installation purposes. Plug all hose assemblies and tube assemblies. This helps prevent fluid loss, and this helps to keep contaminants from entering the system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00900042
Remove tube assembly (1).
Disconnect hose assembly (2).
Disconnect tube assemblies (3), (4), and (5).
Illustration 2 g00900044
Remove filters (10) and (11).
Remove bolts (6) and (7).
Remove fuel filter bases (8) and (9). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00900044
Install fuel filter bases (9) and (8).
Install bolts (7) and (6).
Install filters (11) and (10).
Illustration 4 g00900042
Connect tube assemblies (5), (4), and (3).
Connect hose assembly (2).
Install tube assembly (1).