TUBE ASSEM. 3N6851 - Caterpillar

Illustration 45 g06206425
(1) Plate
(2) 8T-4137 Bolt
(3) 8T-4121 Hard Washer
Install plate (1) fabricated in section "Plate Fabrication Instructions" using two bolts (2), and two hard washers (3) .
Illustration 46 g06206426
(1) Plate
(4) 490-5253 Head
Illustration 47 g06206427
(1) Plate
(4) 490-5253 Head
(5) 0S-1618 Bolt
(6) 8T-4224 Hard Washer
Illustration 48 g06206428
(4) 490-5253 Head
Ensure that the flow arrow in head (4) is pointing towards the outside of the truck, so that the excess fuel is drained outside of the truck. Refer to Illustration 48.
Install head (4) using four bolts (5), and four hard washers (6) as shown in Illustration 46 and Illustration 47.
Illustration 49 g06206429
(4) 490-5253 Head
(7) 223-7809 Filter
(8) 296-5728 Pipe Connector
(9) Inlet hose
(10) Outlet hose
Install engine oil filter (7) on head (4) and connect inlet hose (9) and outlet hose (10) to head (4) using two pipe connectors (8).
Illustration 50 g06206430
(3) 8T-4121 Hard Washer
(10) Outlet hose
(11) 8T-4136 Bolt
(12) 9R-9866 Threaded Boss
(13) 7D-1553 Clip
Secure outlet hose (10) to the frame of the truck using two clips (13), two bolt (11), two threaded bosses (12), and two hard washers (3).