4204516 TUBE AS Caterpillar parts
314E CR, 314E LCR
Rating:
Alternative (cross code) number:
CA4204516
420-4516
4204516
CA4204516
420-4516
4204516
Weight: 5 pounds 2 kg.
EXCAVATOR,
Information:
Removal Procedure
Start By:
Remove the heat exchanger. Refer to Disassembly and Assembly, "Exchanger - Remove" for the correct procedure.
Remove the aftercooler and the mounting bracket. Refer to Disassembly and Assembly, "Aftercooler - Remove" for the correct procedure.
Remove the bracket for the fuel manifold (rail). Refer to Disassembly and Assembly, "Fuel Manifold (Rail) - Remove and Install". It is not necessary to remove the fuel manifold (rail).
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorised personnel that have the correct training.Before begining ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01609853
Turn the fuel supply to the OFF position.
Follow Step 2.a through Step 2.c in order to remove the blanking plate (3). Refer to Illustration 1.
Remove bolts (4).
Remove blanking plate (3).
Remove gasket (5) (not shown).
Remove tube assembly (2) for the fuel return from cylinder head and from transfer pump (1). Plug the tube assembly with new plugs. Cap all open ports with new caps.
Illustration 2 g01609854
If necessary, loosen bolts in Position (X). Remove bolts (7) and remove brackets (6). Remove the assembly of oil cooler (8) from the cylinder block. Note: The bolts are different lengths. Note the position of the different bolts. Note the location and the orientation of the bracket for the tube assemblies.
Remove gasket (9) (not shown). Disassembly Procedure
Illustration 3 g01614554
Remove bolts (10) from the assembly of oil cooler (8).
Remove cooler matrix (13) from spacer plate (11).
Remove gasket (12).
Start By:
Remove the heat exchanger. Refer to Disassembly and Assembly, "Exchanger - Remove" for the correct procedure.
Remove the aftercooler and the mounting bracket. Refer to Disassembly and Assembly, "Aftercooler - Remove" for the correct procedure.
Remove the bracket for the fuel manifold (rail). Refer to Disassembly and Assembly, "Fuel Manifold (Rail) - Remove and Install". It is not necessary to remove the fuel manifold (rail).
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorised personnel that have the correct training.Before begining ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High Pressure Fuel Lines" for safety information. Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01609853
Turn the fuel supply to the OFF position.
Follow Step 2.a through Step 2.c in order to remove the blanking plate (3). Refer to Illustration 1.
Remove bolts (4).
Remove blanking plate (3).
Remove gasket (5) (not shown).
Remove tube assembly (2) for the fuel return from cylinder head and from transfer pump (1). Plug the tube assembly with new plugs. Cap all open ports with new caps.
Illustration 2 g01609854
If necessary, loosen bolts in Position (X). Remove bolts (7) and remove brackets (6). Remove the assembly of oil cooler (8) from the cylinder block. Note: The bolts are different lengths. Note the position of the different bolts. Note the location and the orientation of the bracket for the tube assemblies.
Remove gasket (9) (not shown). Disassembly Procedure
Illustration 3 g01614554
Remove bolts (10) from the assembly of oil cooler (8).
Remove cooler matrix (13) from spacer plate (11).
Remove gasket (12).
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
3564036
TUBE AS-TURBOCHARGER
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
312E, 312E L, 314E CR, 314E LCR, 316E L, 318E L, 416F, 420F, 428F, 430F, 432F, 434F, 444F, 450F, C4.4, C4.4XQ80, CB-44B, CB-54B, CP-54B, CS-54B, CS-64B, CW-34, D3K2 LGP, D4K2 XL, D5K2 XL
3029408
TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312E, 314D LCR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312E, 314D LCR, 314E LCR
3937868
TUBE AS
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
311D LRR, 311F LRR, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 312E, 312E L, 313D2, 313D2 LGP, 314D CR, 314D LCR, 314E CR, 314E LCR
3061244
TUBE AS
311D LRR, 312E, 314D LCR, 314E LCR
311D LRR, 312E, 314D LCR, 314E LCR
2827192
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
2827193
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
3598727
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
2895493
TUBE AS
314D CR, 314D LCR, 314E CR, 314E LCR
314D CR, 314D LCR, 314E CR, 314E LCR
3715598
TUBE AS
312E, 314E LCR
312E, 314E LCR
3715600
TUBE AS
312E, 314E LCR
312E, 314E LCR
2895491
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4161782
TUBE AS
314E LCR
314E LCR
4204515
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204513
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4201199
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4201195
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3729722
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3708838
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
3739974
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
2895492
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
2895491
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204519
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204518
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR
4204517
TUBE AS
314E CR, 314E LCR
314E CR, 314E LCR