4364002 TUBE AS Caterpillar parts
120M, 120M 2
Rating:
Alternative (cross code) number:
CA4364002
436-4002
4364002
CA4364002
436-4002
4364002
Weight: 7 pounds 3 kg.
MOTOR GRADER,
Number on catalog scheme:
5
For full view, you need register
Information:
Service Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
Start the engine. Make sure that the autoshift control is in the off position. Make sure that the rimpull select switch is at 100%.
Raise the implement slightly. Engage the service brakes. Release the parking brake.
Move the transmission control to THIRD SPEED FORWARD (SECOND SPEED FORWARD for the 836H) while the service brakes are applied.
Gradually increase the engine speed to high idle (1000 rpm for the 836H). The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Engage the parking brake. Lower the implement to the ground. Stop the engine. If the machine moved during the test, consult your Caterpillar dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.Parking Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move, reduce the engine speed immediately and apply the service brake pedal.
This test is performed when the parking brake is engaged. If the machine begins to move, compare the engine rpm to the engine rpm of a prior test. This will indicate the amount of system deterioration.
Start the engine. Make sure that the autoshift control is in the off position. Make sure that the rimpull select switch is at 100%.
Raise the implement slightly. Engage the parking brake.
Move the transmission control to THIRD SPEED FORWARD (SECOND SPEED FORWARD for the 836H). Note: To shift into gear with the parking brake engaged, it is necessary to shift into gear. Shift into NEUTRAL. Shift into gear again.The parking brake indicator light should come on.
Gradually increase the engine speed to high idle (1000 rpm for the 836H). The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Lower the implement to the ground. Stop the engine. If the machine moved during the test, consult your Caterpillar dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.
Personal injury can result if the machine moves while testing.If the machine begins to move during test, reduce the engine speed immediately and engage the parking brake.
Start the engine. Make sure that the autoshift control is in the off position. Make sure that the rimpull select switch is at 100%.
Raise the implement slightly. Engage the service brakes. Release the parking brake.
Move the transmission control to THIRD SPEED FORWARD (SECOND SPEED FORWARD for the 836H) while the service brakes are applied.
Gradually increase the engine speed to high idle (1000 rpm for the 836H). The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Engage the parking brake. Lower the implement to the ground. Stop the engine. If the machine moved during the test, consult your Caterpillar dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.Parking Brake Holding Ability Test
Personal injury can result if the machine moves while testing.If the machine begins to move, reduce the engine speed immediately and apply the service brake pedal.
This test is performed when the parking brake is engaged. If the machine begins to move, compare the engine rpm to the engine rpm of a prior test. This will indicate the amount of system deterioration.
Start the engine. Make sure that the autoshift control is in the off position. Make sure that the rimpull select switch is at 100%.
Raise the implement slightly. Engage the parking brake.
Move the transmission control to THIRD SPEED FORWARD (SECOND SPEED FORWARD for the 836H). Note: To shift into gear with the parking brake engaged, it is necessary to shift into gear. Shift into NEUTRAL. Shift into gear again.The parking brake indicator light should come on.
Gradually increase the engine speed to high idle (1000 rpm for the 836H). The machine should not move.
Reduce the engine speed to low idle. Move the transmission direction control to the NEUTRAL position. Lower the implement to the ground. Stop the engine. If the machine moved during the test, consult your Caterpillar dealer for a brake inspection. Make any necessary repairs before the machine is returned to operation.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
120M, 12M, 3056, 3056E, 550B, 559, 560B, 574B, 924G, 924GZ, 924H, 924HZ, 928H, 928HZ, 953D, 963D, C6.6, C7.1, CP-573E, CP-663E, CS-563E, CS-583E, CS-663E, CS-683E, IT28G, R1300G II
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
120M, 12M, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-64, CS-74, D6K, D6K LGP, D6N, IT38H, M316D, M318D, M318D MH, M322D, ...
120M, 12M, 2470C, 320D GC, 320D L, 323D L, 553C, 559, 613G, 924H, 924HZ, 928H, 928HZ, 938H, 953D, 963D, AP-600D, AP-655D, AP1000E, AP1055E, BG600D, BG655D, C6.6, CP-56, CP-64, CP-76, CS-56, CS-56B, CS...
3963359
TUBE AS
120M, 120M 2
120M, 120M 2
3220289
TUBE AS
120M
120M
3197570
TUBE AS
120M
120M
3168717
TUBE AS
120M
120M
3156764
TUBE AS
120M
120M
3156756
TUBE AS
120M
120M
3938152
TUBE AS
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
4364023
TUBE AS
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
3938150
TUBE AS
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
4428719
TUBE AS
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
12M 2, 12M 3 AWD, 140M, 140M 2, 140M 3 AWD, 160M, 160M 2, 160M 3 AWD
3491223
TUBE AS
120M, 120M 2
120M, 120M 2
3422322
TUBE AS
120M, 120M 2
120M, 120M 2