TUBE 4542152 - Caterpillar

Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts. Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are worn or damaged, use new parts for replacement.
Illustration 1 g01189054
Illustration 2 g01189048
Use a Tooling (A) and a suitable lifting device to position cab (26) on the machine. The weight of cab (26) is approximately 408 kg (900 lb).
Illustration 3 g01189053
Illustration 4 g01189052
Install mounting bolts (28) and (29) .
Illustration 5 g01189050
Install cover (27) .
Illustration 6 g01189047
Install cover (25) and bolts (24) on cab (26). Repeat for the other side.
Illustration 7 g01189046
Lift arm assembly (21) and connect antenna cable (23) to radio (22) .
Illustration 8 g01189045
Install bolt (20) .
Install cover (17), cover (18), and bolt (19) .
Illustration 9 g01189043
Install screw (15) and bolts (16) .
Illustration 10 g01189042
Install cover (14) .
Illustration 11 g01189041
Install duct (13) .
Connect harness assemblies (11) and (12) .
Illustration 12 g01189039
Connect harness assemblies (8), (9), and (10) .
Illustration 13 g01189038
Install duct (7) .
Illustration 14 g01189037
Install duct (6), duct (5), and bolts (4) .
Install floor mat (1), plate (3), and bolts (2) .End By:
Install the window wiper motor. Refer to Disassembly and Assembly, "Window Wiper Motor - Remove and Install".
Install the storage box and the covers. Refer to Disassembly and Assembly, "Storage Box and Covers (Cab) - Remove and Install".