TUBE A. 4K8458 - Caterpillar

Obey all state and local laws governing the weight, width and length of a load.Make sure the cooling system has proper antifreeze if moving machine to a colder climate.Observe all regulations governing wide loads.
Illustration 1 g00901921
Block the trailer wheels or rail car wheels before you load the machine (trailer shown).
After the machine is positioned, install the steering frame lock in order to hold the front frame and the rear frame in place.
Lower the bucket or the attachment to the floor of the transport vehicle. Move the transmission direction and speed control to the NEUTRAL position.
Engage the parking brake.
Move the steering and transmission lock control to the LOCKED position.
Turn the engine start switch to the OFF position. Remove the engine start switch key.
Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key.
Lock the door and the access covers. Attach any vandalism protection.
Secure the machine, any equipment and any tools with adequate tie-downs in order to prevent movement during shipping.
Cover the exhaust opening. The turbocharger should not rotate when the engine is not operating. Damage to the turbocharger can result.