TUBE ASSEM. 4L9188 - Caterpillar

4L9188 TUBE ASSEM. Caterpillar parts D320A

Price: query

Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA4L9188
4L-9188
4L9188

Weight: 0.30 pounds 0 kg.

Buy TUBE ASSEM. 4L9188 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

This part in 1 request: Show. This information for suppliers only!

#474462 4L9188

2020-06-05

Compatible equipment models: 4L9188:

INDUSTRIAL ENGINE D320A Caterpillar

Number on catalog scheme: None

Caterpillar 4L9188 Parts scheme TUBE ASSEM.

For full view, you need register

Caterpillar parts catalog:

Caterpillar parts catalog
Product:

D320 ENGINE 63B00001-01801

D320 ENGINE 63B01802-UP

Information:

Removal Procedure
Start By:
Remove the front housing. Refer to Disassembly and Assembly, "Housing (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Do not turn the crankshaft or the camshaft while the camshaft gear is removed. If the front gear group is not correctly timed during installation, interference can occur between the pistons and the valves, resulting in damage to the engine.
Illustration 1 g01047231
Remove bolts (6) and plate (5). Remove adjustable idler gear (4).
Remove bolts (9) and plate (8). Remove idler gear (7).
Remove bolts (3) and plate (2). Remove cluster gear assembly (1).
Illustration 2 g01047233Note: Shaft assembly (13) and stub shaft (15) must be removed in order to remove plate (16).Note: If shaft assembly (13) is removed, the backlash for the camshaft gear and the adjustable idler gear will need to be readjusted. Refer to Testing and Adjusting, "Gear Group (Front) - Time".
Remove nuts (12) and remove shaft assembly (13).
Remove nuts (14) and remove shaft assembly (15).
Remove bolts (11) and remove shaft assembly (10).
Remove locking bolts (17) that hold plate (16) to the cylinder block. Remove plate (16) and the integral seal.