TUBE 4S8975 - Caterpillar

Illustration 1 g01616117Note: Before assembly, lubricate the threads and the bearing surfaces of the bolts with 4C-5599 Anti-Seize Compound. (1) Torque for the bolts ... 54 5 N m (40 4 lb ft)
Illustration 2 g01619282
Rear view
Before assembly, lubricate the threads and the bearing surfaces of the bolts with 4C-5599 Anti-Seize Compound.Use the following procedure in order to tighten the bolts of the half flange (2).
Tighten bolts 3 in any sequence to 54 5 N m (40 4 lb ft).
Tighten bolts 4 in any sequence to 54 5 N m (40 4 lb ft).
Illustration 3 g01538253Use the following procedure to tighten the clamp assembly (5) and turbine clamp assembly (6):
Tighten the clamp assemblies to 14 3 N m (124 27 lb in).
Gently tap around the clamp assemblies with a soft faced hammer.
Again, tighten the clamp assemblies to 14 3 N m (124 27 lb in).