TUBE AS-OIL 5055361 - Caterpillar

Removal Procedure
Table 1
Tool     Part Number     Part Description     Qty    
A     −     Loctite 593     1    Start By:
Remove the vibration damper.
Remove the crankshaft front seal.
Illustration 1 g03851679
Remove bolts (1) that connect oil pan to front housing.
Illustration 2 g03851688
Remove bolts (2) and front housing (3) .Note: Use caution when removing front housing (3) so oil pan gasket does not get damaged.Installation Procedure
Install front housing (3) in the reverse order of removal.Note: Install all bolts finger tight first prior to final tightening.
Apply Tooling (A) in a bead with a width of 1.5 0.3 mm (0.06 0.01 inch)to the joint face. Front housing (3) must be installed within 5 minutes of applying the sealant.
Tighten bolts (1) to a torque of 46 5N m (34 3 lb ft)
Tighten bolts (2) to a torque of 19 3 N m (168 27 lb in)