TUBE AS 5084258 - Caterpillar

Illustration 1 g03697967
(A) Input adapter (B) Bolt and washer (C) Clutch carrier (1) 5P-0840 O-Ring Seal The two 5P-0840 O-Ring Seals (1) are no longer used in mating the CX48-P2300 input adapter (A) to the 368-3592 Clutch Carrier (C) .Adaptable To:
Table 1
Model     Adaptable To     Effective With    
CX48-P2300     S/N:GDH1-434     S/N:GDH435-UP    To adapt this change in production, use the following steps.
Remove input adapter (A) from the torque converter by loosening the 16 half inch bolts and washers (B) .Note: The weight of the input adapter is 36 kg (80 lb).
Remove and discard two O-ring seals (1) .
Install input adapter (A) with 16 bolts and washers (B). Tighten the bolts to a torque of 120 15 N m (90 10 lb ft).