AVSPARE.COM
parts catalog

TUBE AS 5089168 - Caterpillar



5089168 TUBE AS Caterpillar parts TUBE
Rating:
26
Alternative (cross code) number:
CA5089168
508-9168
5089168
Caterpillar 5089168 TUBE AS
Weight: 31 pounds 14 kg.

Buy TUBE AS 5089168 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 4
 
  For full view, you need register

Information:

The XQ175 distribution panel is equipped with a single adjustable main circuit breaker that is adjustable for 208 volts or 480 volts. The panel is equipped with a manual voltage changeover board and a single main load connection.Manually Change the Voltage for the Dual Voltage Distribution Panel with the Voltage Changeover Board on XQ175 Generator Sets
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Ensure that the generator set is not operating. Place the handle of the main circuit breaker in the "OFF" position. The "OFF" position is the open position.
Illustration 5 g01835195
Unfasten the latch (1) and open the access door for the voltage changeover board.
Illustration 6 g01835254
Position the voltage changeover board (3) to the left for low voltage (208V). The position of the voltage changeover board is indicated through the cutout (4). Fasten the voltage changeover board (3) with nuts and washers (2) .
Illustration 7 g01835556
Position the voltage changeover board to the right for high voltage (480V). The position of the voltage changeover board is indicated through the cutout (4). Fasten the voltage changeover board (3) with nuts and washers (2) .
Illustration 8 g01835195
Close the door for the voltage changeover board and fasten the door with the latch (1) .
Illustration 9 g01836974
Use a small screwdriver to adjust the switches (5) of the rotary circuit breaker trip adjustment to the correct amperage.
"HIGH (480V) - 400 Amp"
"LOW (208V) - 630 Amp"Load Connections
DANGER: Shock/Electrocution Hazard-Do not operate this equipment or work on this equipment unless you have read and understand the instructions and warnings in the Operation and Maintenance Manual. Failure to follow the instructions or heed the warnings will result in serious injury or death.
Verify the correct load phase rotation with the generator prior to connecting the output power cables.
Note: The procedure for the load connection is illustrated by using a XQ175 dual voltage distribution panel. All of the instructions are typical for both the dual voltage distribution panel and for the single voltage distribution panel.
Illustration 10 g01940834
Illustration 11 g01835755
(1) Generator output circuit breaker (2) Circuit breakers for the outlets (3) Outlets (4) Outlets (5) CAM LOCS (6) Connection for remote start/stop (7) Generator output leads
Ensure that the generator set is not operating. Place main circuit breakers (1) in the "OFF" position. The "OFF" position is the open position.Dual voltage distribution panels can have two different voltages. Determine the voltage to use. Use either HIGH (480 V) or LOW (208 V) voltage. Select the applicable receptacles (5) or bus bars (3) .
Connect the output power cables to the receptacles (5) or to the bus bars (3) .If it is necessary to connect the output power cables to the bus bars:
Connect the output power cables to the appropriate bus bars (3) .
Failure to connect the unit to a suitable grounding electrode can result in electrical shock and may cause injury or death.
Connect the

Caterpillar parts catalog:

Caterpillar parts catalog
PM822 Cold Planer SL800001-UP (MACHINE) POWERED BY C18 Engine
PM820 Cold Planer TLZ00001-UP (MACHINE) POWERED BY C18 Engine
PM825 Cold Planer ESE00001-UP (MACHINE) POWERED BY C18 Engine
PM820 Cold Planer AK500001-UP (MACHINE) POWERED BY C18 Engine
PM822 Cold Planer EE200001-UP (MACHINE) POWERED BY C18 Engine
PM825 Cold Planer 3C600001-UP (MACHINE) POWERED BY C18 Engine
PM820 Cold Planer AN800001-UP (MACHINE) POWERED BY C18 Engine
PM822 Cold Planer E8S00001-UP (MACHINE) POWERED BY C18 Engine
PM825 Cold Planer 62700001-UP (MACHINE) POWERED BY C18 Engine


Parts tube Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.