TUBE AS 5100826 - Caterpillar

that all safety information, warnings, and instructions are read and understood before any operation or any maintenance procedures are performed. The user is responsible for the performance of maintenance, including all adjustments, the use of proper lubricants, fluids, and filters. The user is also responsible for the replacement of components due to normal wear and aging. Failure to adhere to proper maintenance intervals and procedures may result in diminished performance of the product and/or accelerated wear of components. Use fuel consumption, service hours, or calendar time, WHICH EVER OCCURS FIRST, to determine the maintenance intervals. Products that operate in severe operating conditions may require more frequent maintenance. Before each consecutive interval is performed, all maintenance from the previous interval must be performed.When Required
Air Inlet Filter - Inspect/Clean/Test
Battery - Replace
Engine Air Cleaner Element (Dual Element) - Inspect/Clean/Replace
Fuel System - Prime
Maintenance Recommendations
Radiator - Clean
Daily
Control Panel - Inspect/Test
Coolant Level - Check
Engine Air Cleaner Differential Pressure - Check
Engine Air Precleaner - Check/Clean
Engine Oil Filter Differential Pressure - Check
Engine Oil Level - Check
Fuel Filter Differential Pressure - Check
Fuel System Primary Filter/Water Separator - Drain
Fuel Tank Water and Sediment - Drain
Walk-Around Inspection
Initial 250 Service Hours
Engine Valve Lash - Check
Every 250 Service Hours
Air Shutoff - Test
Battery Electrolyte Level - Check
Coolant Sample (Level 1) - Obtain
Cooling System Supplemental Coolant Additive (SCA) - Test/Add
Engine Oil Sample - Obtain
Hoses and Clamps - Inspect/Replace
Every 500 Service Hours
Centrifugal Oil Filter - Clean
Engine Oil - Change
Engine Oil Filter - Change
Every 1000 Service Hours
Coolant Sample (Level 2) - Obtain
Engine - Clean
Engine Protective Devices - Check
Fuel System Primary Filter - Replace
Fuel System Secondary Filter - Replace
Every 2000 Service Hours
Crankshaft Vibration Damper - Inspect
Driven Equipment - Check
Engine Mounts - Inspect
Fumes Disposal Filter Element - Replace
Every 3000 Service Hours or 3 Years
Coolant (DEAC) - Change
Coolant Extender (ELC) - Add
Every 4000 Service Hours
Catalyst (DOC) - Inspect
Engine Valve Lash - Check
Every 6000 Service Hours
Turbocharger - Inspect
Every 6000 Service Hours or 6 Years
Alternator - Inspect
Coolant (ELC) - Change
Coolant Temperature Regulator - Replace
Starting Motor - Inspect
Water Pump - Inspect
Every 8000 Service Hours
Fuel Pump (High Pressure) - Replace
Overhaul
Aftercooler Core - Inspect/Clean/Test
Overhaul Considerations
Overhaul (Top End)
Overhaul (Major)