TUBE AS 5133085 - Caterpillar

M-Series
Illustration 1 g02468780
(1) 276-6146 Position Sensor As (2) 9X-2537 Bolt (3) 5C-2890 Nut (4) 9X-8256 washer
Use the 9X-2537 Bolts (2), 5C-2890 Nuts (3) and 9X-8256 Washer (4) in order to secure the 276-6146 Position Sensor As (2) to the bracket. Refer to Illustration 1.
Illustration 2 g02468779
(5) Harness connector
Attach the harness connector (5) to the connector on the mainfall sensor.
Illustration 3 g01688015
Use a combination square in order to ensure that the sensor is square to the frame of the machine.Note: One hole for the sensor on the mounting bracket is slotted. The slotted hole allows adjustment of the sensor.
Once the sensor is square to the frame of the machine, secure the mainfall sensor.
Ensure that the mainfall sensor is correctly aligned after the bolts are tightened. Note: Tightening the bolts of the mainfall sensor can cause the mainfall sensor to move out of adjustment.