TUBE AS 5252132 - Caterpillar

Table 1
List of Parts that Need to be Removed    
Item     Quantity     Part Number     Description    
1     2     8L-5008     Elbow    
2     4     077-8196     Connector    
3     2     5P-1465     Hose    
4     2     3B-6552     Elbow    
5     2     3B-6487     Coupling    
6     2     3B-7282     Nipple    
Illustration 1 g00744826
151-5713 Rotor Drive Lubrication Gp (1) 8L-5008 Pipe Elbow (2) 077-8196 Connector (3) 5P-1465 Hose (4) 3B-6552 Elbow (5) 3B-6487 Coupling (6) 3B-7282 Pipe Nipple
Remove the parts that are referenced in Illustration 1 and in Table 1.Note: Table 1 is for each side of the machine.
Illustration 2 g00744828
Fabricated Bar
Fabricate the bar that is shown in Illustration 2. Weld the bar to the chain case in the approximate location that is shown in Illustration 3. Weld the 6R-3841 Clamp Rail to the bar.
Table 2
Required Parts    
Item     Quantity     Part Number     Description    
7     8     4J-5477     Seal    
8     8     4M-5282     Bolt (1/4 inch)    
9     4     7R-6728     Adapter    
10     8     7R-7906     Pipe Clamp    
11     8     7R-7957     Nut    
12     4     7V-5628     Plate    
13     4     8T-4128     Adapter    
14     2     092-7763     Hose Assembly    
15     2     154-4312     Hose Assembly    
16     4     188-6159     Tube    
17     2     6R-3841 (1)     Clamp Rail (20 cm)    
( 1 ) 6R-3841 Clamp Rail is ordered by the centimeter. Order two 20 mm clamp rails.
Illustration 3 g00744829
189-3018 Rotor Drive Lubrication Gp (7) 4J-5477 O-Ring Seal (8) 4M-5282 Bolt (9) 7R-6728 Adapter (10) 7R-7906 Clamp (11) 7R-7957 Nut (12) 7V-5628 Plate (13) 8T-4128 Adapter (14) 092-7763 Hose As (15) 154-4312 Hose As (16) 188-6159 Tube
Install the parts that are referenced in Illustration 3 and in Table 2.