5K3592 TUBE (13.11" Long) Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA5K3592
5K-3592
5K3592
CA5K3592
5K-3592
5K3592
![Caterpillar 5K3592 TUBE (13.11" Long)](https://storage.googleapis.com/a2109_c1_300/p/caterpillar/tube/5k3592.png "Caterpillar 5K3592 TUBE (13.11" Long) parts catalog")
Weight: 0.15 pounds 0 kg.
WHEEL LOADER,
Compatible equipment models: 5K3592:
Number on catalog scheme:
17
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01152129
Remove the setscrew (1). Remove the piston cooling jet assembly (2) from the cylinder block. Note: The engine crankshaft may be rotated in order to access all of the piston cooling jet assemblies.Note: Ensure that the ball moves freely within the valve assembly of the piston cooling jet. Check that the tube of the piston cooling jet assembly is not damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01152132
Install piston cooling jet assembly (2) to the cylinder block. Install the setscrew (1). Tighten the setscrew (1) to a torque of 9 N m (80 lb in). Note: Ensure that piston cooling jet assembly (2) is properly located on the cylinder block. Refer to the Specifications Manual, "Piston Cooling Jet" for the correct procedure for the alignment of the piston cooling jet.End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01152129
Remove the setscrew (1). Remove the piston cooling jet assembly (2) from the cylinder block. Note: The engine crankshaft may be rotated in order to access all of the piston cooling jet assemblies.Note: Ensure that the ball moves freely within the valve assembly of the piston cooling jet. Check that the tube of the piston cooling jet assembly is not damaged.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g01152132
Install piston cooling jet assembly (2) to the cylinder block. Install the setscrew (1). Tighten the setscrew (1) to a torque of 9 N m (80 lb in). Note: Ensure that piston cooling jet assembly (2) is properly located on the cylinder block. Refer to the Specifications Manual, "Piston Cooling Jet" for the correct procedure for the alignment of the piston cooling jet.End By:
Install the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
206, 225, 313B, 314C, 321C, 325D MH, 330D, 330D MH, 345C MH, 428, 950, AP-800, M318D MH, M322D MH
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
120B, 120G, 140B, 1673C, 215, 235, 3304, 3306, 627B, 920, 941, 950, 951B, 955L, 966C, 977K, D4D, D4E, D5, D5B, D6C, D7F, D7G, G3304, G3306
941, 950, 951B, 966C, 977K, D4D, D6C
930, 950, 966C, D6C
518, 930, 930R, 950
815, 950, 966C, 966R
5K3757
TUBE
950
950
950
5K3789
TUBE
950
950
5K3794
TUBE
950
950