TUBE ASSEM. 5N3010 - Caterpillar

Engine Identification
Cat dealers need the information from the serial number plate and from the information plate. Information on the plates helps to determine the components that were included with the engine. The information permits accurate identification of replacement part numbers.Serial Number Plate (1)
Illustration 1 g06053076The serial number plate is on the left side of the cylinder block near the rear of the engine.The following information is stamped on the serial number plate: engine serial number, model, and arrangement number.Information Plate (2)
Illustration 2 g06053089The information plate is on the left side top surface of the cylinder block in front of the front cylinder head.The following information is stamped on the information plate: horsepower, full load rpm, ignition timing, aftercooler temperature, compression ratio, and other information.Identification of the Generator Set (3)
Illustration 3 g06053096The identification plate for the generator set is on the right side of the barrel of the generator.When service is required, the information that is given on this plate should be used. The identification plate for the generator set includes the following information: serial number, model number, and the rating of the generator set. The generator set consists of the engine and the generator. All pertinent generator data is also included on the plate to provide the information that is necessary to order parts.Serial Number Plate for the Generator (1)
Illustration 4 g06065630The serial number for the generator is on the left side of the front of the generator.Output Lead Wiring
All generator lead wiring information can be found on a decal that is on the side panel of the generators terminal box. If the generator is equipped with a circuit breaker, the decal may be found on the sheet metal of the circuit breaker panel.