TUBE 6B4399 - Caterpillar

Illustration 22 g01524692
Lift Full Bucket at 1200 RPM screen
Raise the bucket at 1000 rpm. If the screen does not advance to the screen shown in Illustration 22, lower the bucket to the ground and repeat the 1000 rpm lift again. Repeat the 1000 rpm lift until the screen advances to the screen shown in Illustration 22.
Once the bucket has reached full lift height, the system will prompt the operator to raise the bucket at 1200 rpm.
Repeat Steps 3 through 6 at the following rpm:
1200
1400
1600
1800
2000
2200 or high idleNote: If the screen does not advance to the next engine speed, lower the bucket to the ground and repeat the requested lift.Once the 2200 rpm lift is completed, the screen shown in Illustration 23 will be displayed.After the completion of the full bucket velocity calibration, the screen shown in Illustration 24 will be displayed. This screen reminds the operator to enter the calibration weight to complete the process of calibration.
Illustration 23 g01524698
Lift Full Bucket Velocity Complete screen
Press