TUBE ASSEM. 6K7236 - Caterpillar

Illustration 1 g02327479
Left side view of engine
(1) Crankcase oil pressure sensor
(2) Boost pressure sensor (Air inlet manifold)
(3) Barometric pressure sensor (Atmospheric pressure)
(4) Pressure sensor (Fuel differential)
(5) Pressure sensor (NOx reduction system NRS intake)
(6) Pressure sensor (Engine oil)
(7) Temperature sensor (Charge air cooler outlet)
(8) Speed sensor (Crankshaft)
(9) Speed sensor (Camshaft)
Illustration 2 g02327774
Right side view of engine
(10) Coolant temperature sensor
(11) Fuel pressure sensor
(12) Fuel temperature sensor The electronic control system has the following components:
Electronic Control Module (ECM)
Pressure sensors
Temperature sensors
Speed/Timing sensors
SolenoidsThe ECM functions as the governor for the engine. The ECM modulates the quantity of fuel and injection timing in order to govern the engine.The ECM can activate the following starting aids:
Ether injection
Cycling of injector solenoids The ECM will provide the operator with an illuminated warning light if the engine senses an engine problem. The operator may also experience an engine derate. The warning light or the engine derate could turn off during engine operation. The diagnostic code will be logged in the ECM. The diagnostic code can then be diagnosed at a later time.The ECM is password protected in order to secure calibration of the ECM and customer programmed information. The calibration can be adjusted with flash files by authorized dealers. The flash file is programmed into the personality module.