TUBE ASSEM. (Right Hand) 6K9213 - Caterpillar

Illustration 1 g01338871
Rear view of machine (A) Override switches for the parking brake and auxiliary engine shutdown
Illustration 2 g01338889
Override switches and indicator for parking brake (B) Override switch for the parking brake (C) Override indicator for the parking brake (D) Auxiliary engine shutdown switchYour 980H Wheel Loader comes with a parking brake system that is activated by a spring and released hydraulically. If the machine stalls, the switch for the parking brake release can be activated so the machine can be towed. The switch for the parking brake release is located in the rear grill of the machine. In order to access the switch, flip up the switch guard. Move the switch upward in order to release the parking brake. An auxiliary accumulator stores hydraulic pressure which releases the parking brake when the switch is activated.The parking brake override also has a test mode. Move the switch downward in order to enter the test mode. The green indicator should light indicating that the system is working correctly. Test the parking brake override daily. If the green indicator lamp does not light, contact your local dealer for service. The machine should not be put back into operation until this issue is resolved. When the test is completed, make sure that the toggle switch is put back into the center position. Make sure that the guard for the switch is closed in order to protect the switch.Note: Make sure that the parking brake override is not activated when you park the machine. Close the switch guard in order to deactivate the switch. When the switch guard is closed, the override switch is placed back into the center neutral position. The override switch should be in the center neutral position during normal operation.Override Switches
The steel mill arrangement includes three override switches that are located in the cab. These switches are located on the right-hand side of the cab toward the rear of the machine.
Illustration 3 g01239200
Top view of cab (E) Override switches
Illustration 4 g01239199
Override switches (F) Switch for the transmission override (G) Auxiliary ignition switch (H) System power switchSystem Power Switch
The system power switch (H) should be activated in the forward position if the override feature is needed and the green indicator is not on. If the green indicator is on, leave the switch in the back position. Note: If this switch needs to be activated contact your local dealer immediately for service. The machine should not be placed back into operation until the dealer has inspected the machine.Auxiliary Ignition Switch
Your 980H Wheel Loader is equipped with an auxiliary ignition switch (G). This switch should only be used if the standard ignition switch fails. In order to activate, make sure that the green indicator lamp is on. If the lamp is not on, move the system power switch into the activated forward position. When the indicator lamp is on, the auxiliary ignition switch can be put into the momentary forward position in order to start the machine. Hold the switch forward until the