TUBE ASSEM. 6N1916 - Caterpillar

Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01063216
Illustration 2 g00792496The hydraulic oil filters are located in the hydraulic oil tank. The hydraulic oil tank is located behind the platform on the right side of the machine.
Remove the bolt (2) and swing the platform (1) away from the machine.
Remove the four nuts (3) from each of the covers (4). Remove both of the covers.
Remove the filter elements. Discard the old elements.
Clean the covers. Inspect the condition of the seals. Replace the seals, if necessary.
Install new filter elements and install the covers. Tighten nuts to 47 9 N m (35 7 lb ft).
Check the level of the hydraulic oil tank. Add oil, if necessary.
Close the platform and install the bolt.