TUBE AS-OIL 7N8636 - Caterpillar

Installation Procedure
Table 10
Required Tools
Tool Part Number Part Description Qty
A 421-5665 Lifting Eye Assembly 3
Illustration 19 g06037392
Illustration 20 g06037433
(45) 7X-2577 Bolt
(46) 267-3507 Hard Washer
(47) 415-6674 Fuel Tank As
Install Tooling (A) and suitable lifting device to install fuel tank (47). The weight of fuel tank (47) is approximately 1588 kg (3500 lb). Install 18 bolts (45) and 36 washers (46).
Illustration 21 g06037650
(1) 7X-2577
(2) 267-3507
(3) 425-7883
Use suitable lifting device to install one support (3) The weight of support (3) is approximately 98 kg (215 lb). Use 20 bolts (1) and 40 washers (2).
Illustration 22 g06037618
(48) 8T-4193 Bolt
(49) 9X-8257 Washer
(50) 1P-7017 Half Flange
(51) 6V-5101 O-Ring Seal
(57) 426-1296 Hose
(58) 426-3544 Tube As
Install one tube assembly (58). Use one O-ring (51), two flanges (50), four bolts (48), and four washers (49). Install one hose (57). Repeat for opposite side.
Illustration 23 g06038606
Illustration 24 g06037634
(52) 8T-4648 Bolt
(53) 5P-1076 Hard Washer
(54) 198-4778 Hard Washer
(55) 6V-6782 Clip
(56) 6V-6783 Clip
(59) 8T-4986 Hose Clamp
Install four clips (55), four clips (56), Four bolts (52), Install (28) washers (53), and four washers (54). Install four hose clamps (59).Note: Reposition the washers on either side of the hose clip based on the distance between the hose clips and frame plate.