TUBE 7W5959 - Caterpillar

Lower all equipment, and stop engine before performing maintenance on the machine unless otherwise specified.
Always lower the clamshell in the open position. Do not start or operate machine when it is being serviced. Attach warning tags to controls.Steam can cause personal injury. Always inspect the cooling system with the engine stopped. Remove the filler cap slowly to relieve pressure.Corrosion inhibitor, which contains alkali, can cause personal injury if it contacts skin or eyes.Fumes from fuel are flammable. Do not smoke while refueling.Do not service the air cleaner with engine running.Electrolyte solution is an acid. It can cause personal injury if it contacts skin or eyes.Sparks can cause battery vapors to explode. Attach ground cable last and remove first to prevent sparks near the battery.Attach ground cable from booster battery to starter ground terminal on machine to be started to prevent sparks near the battery.Do not smoke when observing electrolyte level. Block bucket before changing bucket teeth or side cutters. Turn disconnect switch OFF and remove key before servicing the electrical system.Use caution when removing caps, drain plugs, fittings or pressure taps.Hot fluids or components can cause personal injury. Use caution when draining lubricants.Hydraulic oil is flammable. Do not weld on hydraulic tank or lines filled with hydraulic oil.To prevent personal injury, always lower all equipment, stop engine, set parking brake and block or restrain machine before servicing, unless otherwise specified.Do not release emergency brake systems unless machine is blocked or restrained. Machine could move and cause personal injury.When using pressure air, wear safety face shield and protective clothing. Use 30 PSI (205 kPa) maximum pressure air for cleaning purposes.Read and understand all warning and caution information provided on the machine.Follow servicing instructions carefully.Wear protective clothing, safety glasses, respirator, safety shoes, or other safety items as the job requires.Operate the engine only in a well ventilated area.Do not attempt adjustments while machine is moving or the engine is running.Use the proper tools. Change or repair broken or damaged tools or equipment.Do not allow unauthorized personnel on the machine when it is being serviced.Do not attempt repairs you do not understand.Accumulated grease and oil on a machine is a fire hazard. Remove the debris at least every 1000 hours, or each time any significant quantity of oil is spilled.Store oily rags and other combustible materials in a safe place.Promote good housekeeping. Keep tools and work area clean.