TUBE 7W7072 - Caterpillar

7W7072 TUBE Caterpillar parts 3612, 3616, G3612, G3616

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA7W7072
7W-7072
7W7072

Weight: 13 pounds 6 kg.

Buy TUBE 7W7072 Caterpillar genuine, new aftermarket tractor parts with delivery
GAS ENGINE, MARINE ENGINE,

This part in 1 request: Show. This information for suppliers only!

#1424211 7w-7072

2024-09-16

Compatible equipment models: 7W7072:

GAS ENGINE G3612 G3616

MARINE ENGINE 3612 3616 Caterpillar

Number on catalog scheme: 15

For full view, you need register

Information:

Illustration 1 g00504561
Schematic of the Left Rear Brake Oil Temperature Sensor This diagnostic code is recorded when VIMS reads the signal wire of the left rear brake oil temperature sensor as a continuous "high" voltage. The sensor sends a PWM signal to the VIMS module. The possible causes of this diagnostic code are listed here:
A shorted harness
An open supply circuit to the sensor
A failed sensor
An open circuit
The VIMS interface module may have failed. This is unlikely.Note: Ensure that the diagnostic code is still active.Note: The following procedure can create numerous related diagnostic codes. Reconnect all harnesses. Then, the related diagnostic codes will be shown as being NOT active. Complete the following procedure. Then, clear all of the related diagnostic codes.
CHECK THE SUPPLY VOLTAGE AT THE SENSOR.
Turn the disconnect switch and the key start switch to the ON position.
Check the voltage at the machine harness connector of the sensor from contact A (sensor supply) to contact B (ground). Do NOT disconnect the sensor. Use the 7X-1710 Cable probes to measure the voltage. Expected Results: The voltage should measure approximately 8 DCV.Results: