TUBE ASSEM. 8D8417 - Caterpillar

Illustration 10
View of the new ride control hydraulic lines group(18) 0DE4229 Hose Assembly(25) 2Q-1256 Accumulator(39) 8T-4223 Hard Washer(38) 7M-8485 O-Ring Seal(44) 149-2610 Solenoid(60) 0DE5299 Hose Assembly(61) 3R-6790 Port Connector(62) 3D-2824 O-Ring Seal(63) 5P-7468 Clip(64) 5P-7469 Clip(65) 5P-8444 Grommet(66) 8T-8917 Bolt(67) 9U-3862 Housing(68) 1DE3150 Adapter(69) 0DE5332 Hose Assembly33. Install 2Q-1256 Accumulator (25). Refer to Disassembly and Assembly, RENR4631 (9EP0571), "R1600 L.H.D. Vehicle Systems", "Accumulator". Perform Steps 34 through 37 for the installation of the new ride control hydraulic lines group.34. Install the following parts to 9U-3862 Housing (67): 149-2610 Solenoid (44), 3D-2824 O-Ring Seal (62) and 3R-6790 Port Connector (61).35. Install the following parts to 2Q-1256 Accumulator (25): 7M-8485 O-Ring Seal (38), 1DE3150 Adapter (68), 3D-2824 O-Ring Seal (62) and 9U-3862 Housing (67).36. Install the following hose assemblies: 0DE5332 Hose Assembly (69), 0DE5299 Hose Assembly (60).37. Install the following parts to 0DE5299 Hose Assembly (69): 5P-8444 Grommet (65), 5P-7469 Clip (64), 5P-7468 Clip (63), 8T-4223 Hard Washer (39) and 8T8917 Bolt (66).
Illustration 11
View of the existing front frame wiring harness to be modified(70) Existing front frame wiring harness(71) 155-2270 Connecting Plug(72) 186-3736 Socket(73) 8T-8737 Plug-Seal(74) 7N-9738 Plug38. Remove existing 7N-9738 Plug (74) and the ground connector from existing front frame wiring harness (70).39. Install the following parts to existing front frame wiring harness (70): 155-2270 Connecting Plug (71), 186-3736 Socket (72) and 8T-8737 Plug-Seal (73).
Illustration 12
View of the 9EQ0650 Wiring Harness (75).(75) 9EQ0650 Wiring Harness40. Install 9EQ0650 Wiring Harness (75).41. Connect 9EQ0650 Wiring Harness (75). Refer to Illustration 12.42. Check the nitrogen charge of the 2Q-1256 Accumulator (25). Refer to Systems Operation Testing and Adjusting, RENR4628 (9EP0568), "R1600 L.H.D. Hydraulic System", "Ride Control Accumulator Testing and Charging".
Illustration 13
View of the covers to be installed(1) 9EL8562 Cover(2) 9EP3761 Cover (if applicable)(76) 9EQ0530 Cover43. Install 9EL8562 Cover (1).44. Install 9EP3761 Cover (2).45. Install 9EQ0530 Cover (76)46. Remove the steering frame lock pin.47. Remove the bucket control group safety pins.48. Fill the hydraulic tank to the correct level.49. Test the operation of the ride control system.