8N6326 TUBE AS Caterpillar parts
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, PM3508, PM3512, PM3516, PP3516, XQC1600
Rating:
Alternative (cross code) number:
CA8N6326
8N-6326
8N6326
CA8N6326
8N-6326
8N6326
Weight: 1 pounds 0 kg.
GEN SET ENGINE, POWER MODULE,
Compatible equipment models: 8N6326:
Number on catalog scheme:
2
For full view, you need register
Cat SIS web machinery list:
Information:
Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 095-0706 Bolt 2
Illustration 11 g06172557
Illustration 12 g06172580
Illustration 13 g06172587
Lower the temperature of bearing (14). Be sure to match Dimension (B) and Dimension (C) when installing bearing (14.). Dimension (B) indicates the angle of the joint on bearing (14). Dimension (B) is 15° 1°. Dimension (C) shows the distance from bearing (14) to the end of the bore. Dimension (C) is 4.000 0.500 mm (0.1575 0.0197 inch).
Illustration 14 g06172554
Install the O-ring seal and cover (9).
Illustration 15 g06172597
Install gear assembly (12) with oil passage plug (12A) facing out.
Illustration 16 g06172601
Illustration 17 g06172609
Lower the temperature of bearing (11). Be sure to match Dimension (F) and Dimension (G) when installing bearing (11) into adapter assembly (10). Dimension (F) indicates the angle of the joint on bearing (11). Dimension (F) is 15° 1°. Dimension (G) shows the distance from bearing (11) to the end of the bore. Dimension (G) is 3.500 0.500 mm (0.1378 0.0197 inch).
Illustration 18 g06172537
Install the O-ring seal, adapter assembly (10), and bolts (9).
Illustration 19 g06172619
Lower the temperature of bearing (7A). Install bearing (7A) into gear assembly (7). Be sure that each relief (H) is within 2° of each relief in gear assembly (7).
Illustration 20 g06002564
Install O-ring seal (8) onto gear (7).
Illustration 21 g06002578
Install gear (5) and bolts (6).Note: Tooling (A) is for supporting gear (7) during the installation of the cover and the rear crankshaft seal.Note: The bolt holes in gear (7) are not symmetrical. When installing Tooling (C), check the rest of the bolts holes in gear (7) are aligned with the holes in the crankshaft.
Install gear (7) and Tooling (C).
Illustration 22 g06002581
Install cover (3), the seal, bolts (4), and the washers.
Illustration 23 g06002592
Install rear crankshaft seal (1) and bolts (2).
Remove Tooling (C).End By:
Install the flywheel.
Install the electric starting motor.
Table 2
Required Tools
Tool Part Number Part Description Qty
A 095-0706 Bolt 2
Illustration 11 g06172557
Illustration 12 g06172580
Illustration 13 g06172587
Lower the temperature of bearing (14). Be sure to match Dimension (B) and Dimension (C) when installing bearing (14.). Dimension (B) indicates the angle of the joint on bearing (14). Dimension (B) is 15° 1°. Dimension (C) shows the distance from bearing (14) to the end of the bore. Dimension (C) is 4.000 0.500 mm (0.1575 0.0197 inch).
Illustration 14 g06172554
Install the O-ring seal and cover (9).
Illustration 15 g06172597
Install gear assembly (12) with oil passage plug (12A) facing out.
Illustration 16 g06172601
Illustration 17 g06172609
Lower the temperature of bearing (11). Be sure to match Dimension (F) and Dimension (G) when installing bearing (11) into adapter assembly (10). Dimension (F) indicates the angle of the joint on bearing (11). Dimension (F) is 15° 1°. Dimension (G) shows the distance from bearing (11) to the end of the bore. Dimension (G) is 3.500 0.500 mm (0.1378 0.0197 inch).
Illustration 18 g06172537
Install the O-ring seal, adapter assembly (10), and bolts (9).
Illustration 19 g06172619
Lower the temperature of bearing (7A). Install bearing (7A) into gear assembly (7). Be sure that each relief (H) is within 2° of each relief in gear assembly (7).
Illustration 20 g06002564
Install O-ring seal (8) onto gear (7).
Illustration 21 g06002578
Install gear (5) and bolts (6).Note: Tooling (A) is for supporting gear (7) during the installation of the cover and the rear crankshaft seal.Note: The bolt holes in gear (7) are not symmetrical. When installing Tooling (C), check the rest of the bolts holes in gear (7) are aligned with the holes in the crankshaft.
Install gear (7) and Tooling (C).
Illustration 22 g06002581
Install cover (3), the seal, bolts (4), and the washers.
Illustration 23 g06002592
Install rear crankshaft seal (1) and bolts (2).
Remove Tooling (C).End By:
Install the flywheel.
Install the electric starting motor.
Parts tube Caterpillar catalog:
216, 216B, 216B3, 226B, 226B3, 228, 232B, 236, 236B, 236B3, 236D, 242B, 242B3, 242D, 246C, 246D, 247, 247B, 247B3, 248, 252B, 252B3, 256C, 257B, 257B3, 257D, 259B3, 259D, 262C, 262C2, 262D, 267, 267B,...
3508, 3512, 3516, 777B, 785, 789, 994, D11N
3508, 3512, 3516, 777B, 785, 789, 994, D11N
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5130, 5130B, 5230, 5230B, 776C, 776D, 777, 777B, 777C, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D...
1807441
TUBE AS
3516B
3516B
1933044
TUBE
3516B
3516B
1933045
TUBE
3516B
3516B
1070147
TUBE AS
3516B, 785C, 789B, 789C, 793, 793B, 793C, 994, 994D
3516B, 785C, 789B, 789C, 793, 793B, 793C, 994, 994D
3N4116
TUBE ASSEM. (drain)
3516, G343
3516, G343
1W7767
TUBE
3512
3512
1W5572
TUBE ASSEM.
3508
3508
8N2934
TUBE
3508, 3508C, 3512, 3512B, 3516, 3606, 3608, 3612, 3616
3508, 3508C, 3512, 3512B, 3516, 3606, 3608, 3612, 3616
7N5981
TUBE AS
3508, 3508C, 3512, 3512B, 3516, 613
3508, 3508C, 3512, 3512B, 3516, 613
8N8061
TUBE AS
3408, 3408C
3408, 3408C
9G6449
TUBE-CONNECTOR
3406, 3406B, 3408
3406, 3406B, 3408
7E7069
TUBE AS
3406B, 3408, 3616, C280-16
3406B, 3408, 3616, C280-16
1113829
TUBE-SUCTION
3508, 3508B, 3508C, G3508, PM3508
3508, 3508B, 3508C, G3508, PM3508
1142413
TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3516, G3516B
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, G3516, G3516B
1W6114
TUBE
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3612, 3616, 5230, 5230B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H, G...
3508, 3508B, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 3612, 3616, 5230, 5230B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H, G...
3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 3516B, 3516C, 5230, 5230B, 777D, 784B, 784C, 785, 785B, 785C, 785D, 789, 789B, 789C, 789D, 793, 793B, 793C, 793D, 797, 797B, 994, 994D, 994F, 994H, SPF343...
2680038
TUBE
3508, 3508B, 3508C, 3512B
3508, 3508B, 3508C, 3512B
2102535
TUBE AS
3508, 3508B, 3508C, 3512, 3512B, 3512C, XQC1200
3508, 3508B, 3508C, 3512, 3512B, 3512C, XQC1200