8N8752 TUBE ASSEM. Caterpillar parts
235, 966C
Rating:
Alternative (cross code) number:
CA8N8752
8N-8752
8N8752
CA8N8752
8N-8752
8N8752
Weight: 0.70 pounds 0 kg.
EXCAVATOR, WHEEL LOADER,
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$19.96
27 Feb 2022
US: Florida-Parts-Z
2P2547 - Filler Neck Oil GAGE 8N8752 for Caterpillar (CAT)
FIRST PRICE PARTS
FIRST PRICE PARTS
Number on catalog scheme:
4
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1864 Retaining Ring Pliers As 1
B 1P-1861 Retaining Ring Pliers 1 Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01197024
Drive pin (4) into pin (5). Slide pin (5) and gear assembly (1) aside in order to access retaining ring (3). Use Tooling (A) in order to remove retaining ring (3). Remove gear assembly (1).
Use Tooling (A) in order to remove retaining ring (2). Remove pin (5). Remove pin (4) from pin (5).
Illustration 2 g01197025
Remove bearing (6). Note: Bearing (6) will be destroyed on removal.
Use Tooling (B) in order to remove retaining ring (7) from gear (8).
Remove spacer (9). Use a suitable press in order to remove bearing (10).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-1864 Retaining Ring Pliers As 1
B 1P-1861 Retaining Ring Pliers 1 Note: Cleanliness is an important factor. Before you begin the disassembly procedure, the exterior of the components should be thoroughly cleaned. This will help to prevent dirt from entering the internal mechanism. Precision components can be damaged by contaminants or by dirt. Perform disassembly procedures on a clean work surface. Keep components covered and protected at all times.
Illustration 1 g01197024
Drive pin (4) into pin (5). Slide pin (5) and gear assembly (1) aside in order to access retaining ring (3). Use Tooling (A) in order to remove retaining ring (3). Remove gear assembly (1).
Use Tooling (A) in order to remove retaining ring (2). Remove pin (5). Remove pin (4) from pin (5).
Illustration 2 g01197025
Remove bearing (6). Note: Bearing (6) will be destroyed on removal.
Use Tooling (B) in order to remove retaining ring (7) from gear (8).
Remove spacer (9). Use a suitable press in order to remove bearing (10).
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
6N4555
TUBE ASSEM.
235, 528B, 530B, 963
235, 528B, 530B, 963
3V9234
TUBE ASSEM.
225, 227
225, 227
7V1072
TUBE ASSEM.
225, 227
225, 227
5V7467
TUBE
225
225
8N0188
TUBE
215
215
5C6780
TUBE ASSEM.
215, 225
215, 225