TUBE AS 8N8953 - Caterpillar

Disassembly Procedure
Start By:a. Remove the diesel exhaust fluid module.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g06049735
Disconnect harness assembly (1) and remove solenoid valve assembly (2).
Illustration 2 g06049779
Remove relays (3).
Illustration 3 g06049780
Remove bolts (4). Remove control module (5).
Illustration 4 g06049782
Disconnect harness assembly (8). Remove cable straps (7) and electronic control (6).
Illustration 5 g06049786
Remove cover (9).
Illustration 6 g06049792
Remove expansion device (10).
Illustration 7 g06049794
Remove filter (11).
Illustration 8 g06050246
Remove cable straps (13), bolts (14), and bracket (12).
Illustration 9 g06050224
Disconnect harness assembly (15). Reposition harness assembly (15) to avoid interference in the disassembly procedure.
Illustration 10 g06049812
Remove bolts (16). Separate support assembly (17) from pump (18).
Illustration 11 g06049818
Remove cable straps (20) and harness assembly (19).
Illustration 12 g06049824Note: Place identification mark on DEF pump coolant connectors (21) and DEF pump connectors (22) for installation purposes. DEF pump coolant connectors (21) and DEF pump connectors (22) are not interchangeable.
Remove DEF pump coolant connectors (21) and DEF pump connectors (22). Remove the O-ring seals.