TUBE AS 8N9145 - Caterpillar

Connection Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 439-3939 Link Bracket As 4
B 422-2352 Support Stand 1
Illustration 1 g03671613
Install shaft (10) into output transfer gears (11).
Illustration 2 g03671557
Install O-ring seals (9) and (8).
Illustration 3 g03671477
Illustration 4 g03671630
Attach Tooling (A) and a suitable lifting device to transmission (1). The weight of transmission (1) is approximately 565 kg (1246 lb). Use Tooling (A) and the suitable lifting device in order to connect transmission (1) to the output transfer gears.
Install the washers and bolts (7).
Tighten bolts (7) to a torque of 300 40 N m (221 30 lb ft).
Tighten bolts (7A) to a torque of 120 20 N m (89 15 lb ft).
Install tube assembly (5).
Install fitting (4) and the tube assembly.
Illustration 5 g03671472
Connect harness assembly (3). Attach cable straps (2). End By:
Install the torque converter to the transmission and the output transfer gears.