9K7661 TUBE ASSEM. Caterpillar parts
950
Rating:
Alternative (cross code) number:
CA9K7661
9K-7661
9K7661
CA9K7661
9K-7661
9K7661
Weight: 0.30 pounds 0 kg.
WHEEL LOADER,
Compatible equipment models: 9K7661:
Number on catalog scheme:
8
For full view, you need register
Caterpillar parts catalog:
Information:
Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01271317
Typical example
If necessary, install pulley (8) and nut (7) to alternator (3). Hold the shaft of the alternator with an allen wrench. Use a cranked ring spanner (box wrench) in order to tighten nut (7). Note: Different types of alternator have different sizes of nut. Ensure that the correct torque value is used for the nut.Tighten M16 and M17 nuts to a torque of 80 N m (59 lb ft). Tighten 5/8 inch - 18 UNF nuts to a torque of 102 N m (75 lb ft).
Position alternator (3) on alternator mounting bracket (4).
Install bolt (6) to alternator (3). Install washer (2) and nut (1) to bolt (6).
Install bolt (5) to alternator (3).
Tighten nut (1) and bolt (5) to a torque of 22 N m (16 lb ft).
Connect the wiring harness assembly to alternator (3). Note: The incorrect connection of the harness assembly can result in damage to the alternator or failure.
Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Turn the battery disconnect switch to the ON position.
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g01271317
Typical example
If necessary, install pulley (8) and nut (7) to alternator (3). Hold the shaft of the alternator with an allen wrench. Use a cranked ring spanner (box wrench) in order to tighten nut (7). Note: Different types of alternator have different sizes of nut. Ensure that the correct torque value is used for the nut.Tighten M16 and M17 nuts to a torque of 80 N m (59 lb ft). Tighten 5/8 inch - 18 UNF nuts to a torque of 102 N m (75 lb ft).
Position alternator (3) on alternator mounting bracket (4).
Install bolt (6) to alternator (3). Install washer (2) and nut (1) to bolt (6).
Install bolt (5) to alternator (3).
Tighten nut (1) and bolt (5) to a torque of 22 N m (16 lb ft).
Connect the wiring harness assembly to alternator (3). Note: The incorrect connection of the harness assembly can result in damage to the alternator or failure.
Install the alternator belt. Refer to Disassembly and Assembly, "Alternator Belt - Remove and Install".
Turn the battery disconnect switch to the ON position.
Parts tube Caterpillar catalog:
206, 225, 313B, 314C, 321C, 325D MH, 330D, 330D MH, 345C MH, 428, 950, AP-800, M318D MH, M322D MH
14G, 16G, 24H, 3192, 515, 525, 525B, 611, 613C, 613C II, 613G, 615, 615C, 65, 69D, 7211, 7231, 7241, 7251, 7261, 7271, 769C, 769D, 771C, 771D, 773B, 773D, 773E, 773F, 775B, 775D, 775E, 775F, 776, 777,...
120B, 120G, 140B, 1673C, 215, 235, 3304, 3306, 627B, 920, 941, 950, 951B, 955L, 966C, 977K, D4D, D4E, D5, D5B, D6C, D7F, D7G, G3304, G3306
941, 950, 951B, 966C, 977K, D4D, D6C
930, 950, 966C, D6C
518, 930, 930R, 950
815, 950, 966C, 966R
9M1143
TUBE
824B, 826B, 834, 992
824B, 826B, 834, 992
9K9872
TUBE ASSEM.
966C
966C
9K9645
TUBE ASSEM.
980B
980B
1P4279
TUBE 15 in.
816, 966C
816, 966C
8J8010
TUBE ASSEM.
980B
980B
8J8011
TUBE ASSEM.
980B
980B