TUBE ASSEM. 9K7758 - Caterpillar

Illustration 3 g01370908
A seat belt should be worn at all times during machine operation to prevent serious injury or death in the event of an accident or machine overturn. Failure to wear a seat belt during machine operation may result in serious injury or death.
Do Not Weld or Drill (3) (If Equipped)This safety message is located on the post for the ROPS (Rollover Protective Structure).
Illustration 4 g01226901
Structural damage, an overturn, modification, alteration, or improper repair can impair this structure's protection capability thereby voiding this certification. Do not weld on or drill holes in the structure. Consult a Caterpillar dealer to determine this structure's limitations without voiding its certification.
Crush Hazard (4)This safety message is located on both sides of the machine at the rear of the hood.
Illustration 5 g01412530
A crushing hazard exists between the front frame and rear frame when the machine is articulated. This can result in personal injury. Keep your feet inside the operator station.
Crush Hazard (5)This safety message is located on both sides of the machine near the articulation joint.
Illustration 6 g01371644
Stay back a safe distance. No clearance for a person in this area when the machine turns. Severe injury or death from crushing could occur.
Crush Hazard (6)This safety message is located on both sides of the machine near the articulation joint.
Illustration 7 g01371647
Connect the steering frame lock between the front and the rear frames before lifting, transporting, or servicing the machine in the articulation area. Disconnect the steering frame lock and secure the steering frame lock before resuming operation. Severe injury or death could occur.
Batteries (7)This safety message is located on the left side of the machine above the drum.
Illustration 8 g01370909
Explosion Hazard! Improper jumper cable connections can cause an explosion resulting in serious injury or death. Batteries may be located in separate compartments. Refer to the Operation and Maintenance Manual for the correct jump starting procedure.
Pressurized System (8)This safety message is located in the engine compartment on top of the radiator.
Illustration 9 g01371640
Pressurized system: Hot coolant can cause serious burn. To open cap, stop engine, wait until radiator is cool. Then loosen cap slowly to relieve the pressure.