TUBE ASSY 1 1/ 9N9083 - Caterpillar

Table 1
Effectivity    
Model     Adaptable To     Effective With    
950H     S/N:JAD100,102-1240,1500-1581,1584-2274     S/N:JAD2275-UP    
S/N:JLX100-753 S/N:JLX754-UP    
S/N:M1G150-2442,2800-3437 S/N:M1G3438-UP    
S/N:MXL267-1353,1356-1361,1364-1369 S/N:MXL1370-UP    
962H     S/N:M3G150-835,1200-1374     S/N:M3G1375-UP    
S/N:MAL100-216,500-599 S/N:MAL600-UP    
S/N:PCW200-328 S/N:PCW329-UP    
S/N:SSA200-395 S/N:SSA396-UP    Required Parts
Table 2
Required Parts    
Qty     Part No     Description     Former Part No    
1     091-0081     Spacer     -    
1     125-8534     Plate As     -    
1     392-8698     Hose As     246-4770    
1     8M-2773     Clip     -    
1     8T-4121     Hard Washer     -    
1     8T-4196     Bolt     -    
Personal injury can result from hydraulic oil pressure and hot oil.Hydraulic oil pressure can remain in the hydraulic system after the engine has been stopped. Serious injury can be caused if this pressure is not released before any service is done on the hydraulic system.Make sure all of the attachments have been lowered, and the oil is cool before removing any components or lines. Remove the oil filler cap only when the engine is stopped, and the filler cap is cool enough to touch with your bare hand.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the machine. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide", for tools and supplies suitable to collect and contain fluids in Caterpillar machines.Dispose of all fluids according to local regulations and mandates.
Rework Procedure
Illustration 1 g03821663
246-4770 Hose As showing routing (1) 246-4770 Hose As (2) 4S-1962 Clip (3) 8T-4121 Hard Washer Qty. Two (4) 8T-4133 Nut (5) 8T-4136 Bolt (6) 8M-2773 Clip
Disassemble 246-4770 Hose As (1) from the machine. Discard parts (2) through (6). Other clips and fasteners retain for reuse.
Illustration 2 g03821667
Reinstalling the new 392-8698 Hose As along the former route (7) 392-8698 Hose As (8) 125-8534 Plate As (9) 091-0081 Spacer (10) 8T-4121 Hard Washer (11) 8T-4196 Bolt (12) 8M-2773 Clip
Assemble the new parts onto 392-8698 Hose As (7) as shown in Illustration 2.
Illustration 3 g03822042
Before and after pictures of hose routing (1) 246-4770 Hose As Before (7) 392-8698 Hose As After
Complete routing 392-8698 Hose As (7) and attach back to the connections of the former hose using the existing hardware.