TUBE AS 9R7014 - Caterpillar

Up/Left Button
Illustration 3 g01322948
Up/left button
The Up/left button (3) is used for the following purposes:
Highlight the previous menu item.
Highlight the previous list selection item.
Highlight the next character or the next action item that is on the left side of a data entry screen.Down/Right Button
Illustration 4 g01322950
Down/right button
The down/right button (4) is used for the following purposes:
Highlight the next menu item.
Highlight the next list selection item.
Highlight the next character or the action item that is on the right side of a data entry screen.OK Button
Illustration 5 g01322951
OK button
The OK button (5) is used for the following purposes:
Enter the highlighted menu.
Select the highlighted list selection item.
Select the highlighted character on a data entry screen.
Select the highlighted action on a data entry screen.
Acknowledge a popup event or a diagnostic.Additional Functions
Three additional functions can be performed by pressing a combination of the buttons simultaneously. The functions and the combination of buttons are described below.Enter the Simple Calibration Update Screen
Enter the simple calibration update screen by pressing the back and up/left buttons simultaneously.Enter the Weigh Screen
Enter the weigh screen from any menu screen by pressing the up/left and down/right buttons simultaneously.Enter the Standby Screen
Enter the standby Screen from the weigh screen by pressing the down/right and OK buttons simultaneously. Press any button in order to move from the Standby screen to the weigh screen.Basic Operation of the Messenger
Selecting An Item From the Menu
Press the OK button in order to select one of the menu items. The title of the menu is shown in a banner along the top of the display. The options that are available for each menu item will then be displayed. The options may be displayed individually or the options may be displayed in groups. If a down arrow appears, pressing the down/right button will highlight the next option. The down arrow is displayed in the left most column of the display. If an up arrow appears, pressing the up/left button will highlight the previous option. The up arrow is displayed in the left most column of the display. Press the OK button in order to select a menu option. Press the back button in order to move up to the previous menu.Reweigh / Clear/Zero Switch
Illustration 6 g01680581
Reweigh / clear/zero switch
(9) Reweigh switch
(10) Clear/zero switch The reweigh / clear/zero switch is a rocker switch. The reweigh / clear/zero switch is located to the right of the display of the Messenger. See Illustration 6.The upper half of the switch functions as the reweigh switch (9). The lower half functions as the clear switch and the zero switch (10). This switch is used for the following three functions:
Reweighing a bucket
Clearing the display
Zeroing the systemStore Switch
Illustration 7 g01680594
Store switch
(11) Store switch
Illustration 8 g01962780The store switch (11) is a push-button switch that is located on the implement control pod. The store switch is shown in Illustration 7. The following can be performed with the store switch:
Storing the current truck information in the Electronic Control Module (ECM) memory
Resetting the truck weight and bucket weight to zeroWeighing Materials
The steps that are used in