TUBE AS 9U8420 - Caterpillar

Illustration 1 g03711448
Illustration 2 g03708683
(1) Keypad guidance area (2) Left key (3) Up key (4) Down key (5) Right keyEnter the "Tool Program" menu option by selecting "Tool Program" from the "Service" menu. Press the Up or Down key until "Tool Program" is highlighted and then press the "OK" key.Note: Refer to Systems Operation, "Service Mode" for instructions to get to the "Service" menu.Press the Up or Down key until the desired tool is selected. Press the "OK" key to program the selected tool. The following screen will be displayed.
Illustration 3 g03711442
Typical screen for "Tool Configuration" item.Press the Up or Down key to highlight the parameter that is to be changed.Press the "OK" key to move the cursor from the setting value to the data value. The data value will be highlighted.Press the Up or Down key to change the data value. Press the "OK" key to set the value.Note: The indication items vary by model.Tool Configuration (One Way)
Illustration 4 g03708153
Use Up and Down keys to select the desired value.
Use the Left or Right keys to change value (or activate Number Pad by pressing the middle Function key).
Press "OK" to store changed values.