9Y2292 TUBE AS-OUTLET Caterpillar parts
D4H, D4HTSK II
Rating:
Alternative (cross code) number:
CA9Y2292
9Y-2292
9Y2292
CA9Y2292
9Y-2292
9Y2292
Weight: 0.40 pounds 0 kg.
TRACK SKIDDER, TRACK-TYPE TRACTOR,
Information:
PARTS NEEDED
Qty
Part Number Description
2 3867311 ANTENNA-GPS
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 17% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.
ACTION REQUIRED
The GNSS antennas must be replaced with new GNSS antennas that have the new internal components to mitigate the wireless interference to the Japan region.
Remove the 3867311/">386-7311-01 GNSS Antennas from the top of the cab/ROPS and replace with the new 3867311/">386-7311-02 GNSS Antennas. Confirm that the antennas obtained from Caterpillar are change level 02 before replacement of machine GNSS antennas.
The 3867311/">386-7311 GNSS Antennas are bolted from underneath using 8T-4121 (12) washers and 8T-4137 (13) bolts. The mounting plate for the GNSS Antennas are secured to the machine by three bolts 8T-4183 (16) and washers 8T-7971 (14).
The 3867311/">386-7311 GNSS Antennas mounting varies slightly across D6K, D6N, D6T, and D8T models.
As long as the 3867311/">386-7311 GNSS Antennas are mounted back in the same location of the previous antennas, no new Grade Control system measure-up will be required.
With the new 3867311/">386-7311 GNSS Antennas, confirm that the machine has a good GNSS signal by checking the number of connected satellites, high left GNSS Datalink Integrity, and low Vertical and Horizontal Error.
Image 1 and Image 2 are D6T
Image 3 is D6K
Image 4 is D6N
Image 5 is D8T
Image1
Image2
Image3
Image4
Image5
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-2000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
2001-4000 hrs,
25-36 mo 100.0% 0.0% 0.0% 0.0% 0.0% 100.0%
This is a 1.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar parts catalog:
Parts tube Caterpillar catalog:
9Y1542
TUBE AS
508, 916, 953, D4HTSK II
508, 916, 953, D4HTSK II
9W4318
TUBE AS
578, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D6H, D6H XL, D6H XR, D7H, D7R, D8R
578, D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5HTSK II, D6H, D6H XL, D6H XR, D7H, D7R, D8R
3W7770
TUBE AS
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
D4H, D4H XL, D4HTSK II, D4HTSK III, D5H, D5H XL, D5HTSK II
8G6604
TUBE AS
D4H, D4H XL, D4HTSK II, D4HTSK III
D4H, D4H XL, D4HTSK II, D4HTSK III
3W1300
TUBE AS
D4H, D4H XL, D4HTSK II, D4HTSK III
D4H, D4H XL, D4HTSK II, D4HTSK III
8G6619
TUBE
D4H, D4H XL, D4HTSK II, D4HTSK III
D4H, D4H XL, D4HTSK II, D4HTSK III
9G0799
TUBE AS
D4H, D5H
D4H, D5H
8G6309
TUBE AS
D4H
D4H
6Y3395
TUBE AS
D4H, D4HTSK II, D4HTSK III
D4H, D4HTSK II, D4HTSK III
6Y0323
TUBE AS
508, 517, D4HTSK II, D4HTSK III
508, 517, D4HTSK II, D4HTSK III
8E0555
TUBE AS
D4HTSK II
D4HTSK II
8G6774
TUBE AS
D4H
D4H
8G6775
TUBE AS
D4H
D4H
8G6538
TUBE AS
D4H, D4HTSK II
D4H, D4HTSK II
8G6536
TUBE AS
D4H, D4HTSK II
D4H, D4HTSK II
3W5484
TUBE AS
D6H
D6H
5G9910
TUBE AS
D6H
D6H
7T5120
TUBE
D6D
D6D
8G6875
TUBE
D4H, D4HTSK II
D4H, D4HTSK II
9T8711
TUBE AS
973
973
4T9969
TUBE
973
973
5N9528
TUBE AS
D4H, D4HTSK II
D4H, D4HTSK II
9Y2291
TUBE AS-INLET
D4H, D4HTSK II
D4H, D4HTSK II