parts catalog

TURBINE-TC-YM 3905268 - Caterpillar

3905268 TURBINE-TC-YM Caterpillar parts TURBINE
Alternative (cross code) number:
Caterpillar 3905268 TURBINE-TC-YM
Weight: 26 pounds 12 kg.

Buy TURBINE-TC-YM 3905268 Caterpillar genuine, new aftermarket tractor parts with delivery

Related part:
1T0221  TURBINE-TC-YM  3905268  CL
  For full view, you need register


Removal Procedure
Table 1
Required Tools    
Tool     Part Number     Part Description     Qty    
A     6V-9120     Socket (1)     1    
( 1 ) Tool (A) is a 46 mm socket.Start By:
Remove the engine oil pan. Refer to Disassembly and Assembly, "Engine Oil Pan - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00534937
Use Tool (A) to rotate the crankshaft until two of the pistons are at the bottom center. Remove connecting rod nuts (1) from the connecting rod. Remove connecting rod cap (2) for one connecting rod.
Remove the lower half of the connecting rod bearing from connecting rod cap (2) .
Remove the upper half of the connecting rod bearing from the connecting rod. Push the connecting rod away from the crankshaft, if necessary. Note: Ensure that identification marks are on the connecting rod, the connecting rod cap and the connecting rod bearing. The identification marks must be on the bearing tab side for installation purposes.
Repeat Steps 1 through 3 for the remaining connecting rod bearings.

Parts turbine Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.