TURBO GP-BASIC 0R5851 - Caterpillar

Illustration 5 g00949278
Remove screws (8) and screws (9). Lower dash (6) .
Illustration 6 g00949279
Disconnect harness assemblies (11) .
Remove screws (14) .
Remove thermostatic switch (13) from fan motor housing (10) .
Remove bolts (12). Remove fan motor housing (10) .
Illustration 7 g00949280
Disconnect harness assembly (16) .
Remove nuts (15) and clip (17) .
Remove fan motor (18) from the housing.
Illustration 8 g00949281
Remove bracket (19) from the fan motor.
Illustration 9 g00949282
Remove clip (20) from fan (21) .
Remove fan (21) and spacer (22) from the motor.
Repeat Steps 12 through 17 for the remaining fan assembly.Installation Procedure
Illustration 10 g00949282
Install fan (21) and spacer (22) onto the motor.
Install clip (20) onto fan (21) .
Illustration 11 g00949281
Install bracket (19) onto the fan motor.
Illustration 12 g00949280
Install fan motor (18) into the housing.
Position clip (17) .
Install nuts (15) .
Connect harness assembly (16) .
Repeat Steps 1 through 8 for the remaining fan assembly.
Illustration 13 g00949279
Position fan motor housing (10). Install bolts (12).
Install thermostatic switch (13) onto fan motor housing (10) .
Install screws (14) .
Connect harness assemblies (11) .
Illustration 14 g00949278
Raise dash (6). Install screws (8) and screws (9) .
Illustration 15 g00949277
Install screws (7) into both sides of dash (6) .
Illustration 16 g00949276
Connect harness assembly (5) .
Install cable strap (4) .
Illustration 17 g00949275
Illustration 18 g00949274
Install bolts (2) that are underneath instrument panel (1) .
Position instrument panel (1). Install screw (3) .