TURBO GP 0R6245 - Caterpillar

2. Disconnect oil tube (2) from housing (1). 3. Remove four nuts (3) and washers that hold the housing to bracket (4). Remove the magnetic screen and the housing.Install Transmission Magnetic Screen (Power Shift)
1. Put the magnetic screen (2) and housing (1) in position on the bracket. Install the four nuts and washers that hold the housing in position.2. Connect oil tube (3) to the housing.3. Fill the transmission and bevel gear case with oil to the correct level. See LUBRICATION AND MAINTENANCE GUIDE.end by: a) install floor platesDisassemble Transmission Magnetic Screen (Power Shift)
start by: a) remove transmission magnetic screen 1. Remove tube assembly (5) and magnets.2. Remove element (4) and the spring washer from housing (2).3. Remove cover (1) and seal (3) from the housing.Assemble Transmission Magnetic Screen (Power Shift)
1. Install a new seal (5) in the housing.2. Install cover (2) and four nuts (1).3. Install the ring, element (3), tube assembly (4) and magnets.end by: a) install transmission magnetic screen