TURBO GP-BASIC 0R7766 - Caterpillar

Linkage Adjustment Procedure:
With control lever in shutoff position and governor control shaft in shutoff position, put lever (6) on shaft at angle (F).Angle (F) is ... 20° 5°Dimension (A) ... 21.54 .04 in.(547 1 mm)Tighten nut (1) to ... 9 3 lb. ft.(12 4 N m)Dimension (D) (approximately) ... 23.5 in.(597 mm)Tighten nuts (3) to ... 9 3 lb. ft.(12 4 N m)Dimension (E) (approximately) ... 18.9 in.(480 mm)Tighten nut (5) to ... 30 5 lb. ft.(40 7 N m)Decelerator Adjusment:
Adjust bolt (4) to obtain dimension (C) ... 4.00 in.(101.6 mm)Adjust stop (2) so that engine speed with decelerator pedal pushed all the way down is ... 985 50 rpmCheck engine high idle speed after decelerator is adjusted. Make reference to FUEL SETTING INFORMATION.After linkage has been adjusted, set at high idle and lock stop at dimension (B).Dimension (B) ... .06 in.(1.5 mm)