TURBO GP-BASIC 10R8249 - Caterpillar

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Inspect the turbocharger gasket for wear or damage. If the turbocharger gasket is worn or damaged, use a new part for replacement.
Apply 5P-3931 Anti-Seize Compound on the threads of the mounting studs for the turbocharger.
Illustration 1 g00617565
Position the turbocharger gasket and turbocharger (6) on the exhaust manifold. Install nuts (4) that fasten turbocharger (6) to the exhaust manifold.
Tighten the locknuts that fasten the turbocharger to the exhaust manifold. Tighten the 3E-8017 Locknut with the Spiralock thread to the following torque: ... 54 5 N m (40 4 lb ft)Tighten the standard 9X-6620 Locknut to the following torque: ... 70 5 N m (50 4 lb ft)
Illustration 2 g00617515
Inspect the gaskets for oil supply tube assembly (5) and tube assembly (2). If the gaskets are worn or damaged, use a new part for replacement.
Position tube assembly (2) and the gasket on turbocharger (6). Install bolts (1) on the turbocharger and install bolts (3) on the cylinder block.
Install the gasket for oil supply tube assembly (5) and connect oil supply tube assembly (5) to turbocharger (6).