TURBO GP-BASIC 20R0613 - Caterpillar

Be sure no one is working on or near the machine to prevent injury. Keep the machine under control at all times to prevent injury.Reduce engine speed when maneuvering in tight quarters or when breaking over a rise.Select the gear range necessary before starting downgrade. Do not change gears while going downhill.A good practice is to use the same gear range going downgrade that would be used to go up the grade.Do not allow the engine to overspeed downhill. Use the service brake pedal to reduce engine overspeed going downhill.When the load will be pushing the machine, put the transmission speed control lever in FIRST speed before starting downhill.1. Adjust the operator's seat.2. Fasten and adjust the seat belt. 3. Raise all lowered implements enough to clear any obstructions. 4. Push down on the service brake pedals to keep the machine from moving. 5. Pull the parking brake knob out to release the parking brake. 6. Move the flywheel clutch lever to the brake position to apply the flywheel clutch brake. 7. Move the transmission speed control lever to the desired speed. 8. Move the transmission direction control lever to the desired direction. 9. Release the service brake pedals. 10. Move the flywheel clutch lever to engage the flywheel clutch and allow the machine to move. 11. Move the governor control lever to increase the engine speed.12. Drive the machine forward for best visibility and control.
For operator comfort and maximum service life of power train components, deceleration and/or braking is recommended before any directional shifts are made.